685851
15
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
Troubleshooting
Battery Life
If the display repeatedly shows “-- -- -- -- --” when using a 9V
battery for remote programming, replace the battery.
Reset Button
Press RESET if the controller is not working properly.
The Reset button resets the controller. Active irrigation
is canceled, but all previously programmed watering
schedules remain stored in memory. Irrigation will resume
at the next scheduled Start Time.
1. Insert a small tool into the access hole and press until
the controller is reset.
NOTE: We suggest using a non-metallic object such
as a pencil or pen to press the Reset button.
1.
Error Detection
The ESP-Me controller has built-in error detection that can
automatically generate an alert caused by an essential
programming error or if an electrical short condition is
detected.
The Alert LED light on the ESP-Me controller front panel will
light up to indicate an alarm condition:
ALERT
Programming Errors (blinking LED)
Error Alert
LED
Error Message
On Display
No Start Times are set BLINK NO START TIMES
No Run Times are set BLINK NO RUN TIMES
No Watering Days are set BLINK NO WATER DAYS
The ESP-Me controller will reset or clear when the error is
corrected.
NOTE: The dial must be in the AUTO RUN position for
an Alert message to appear on the display.
Electrical Errors (non-blinking LED)
Error Alert
LED
Error Message
On Display
Master Valve short SOLID MASTER VALVE/PUMP
WIRE SHORTED OR
HIGH CURRENT
Station short SOLID STATION “X” WIRE
SHORTED
When an electrical error is detected, irrigation for the
aected station is cancelled and watering advances to the
next operable station in the program.
The controller will attempt to water the aected station
again at the next scheduled watering. Completion of a
successful watering will clear the error condition associated
with that station.
Clearing Electrical Error Alerts
Turn the dial to the AUTO RUN position
to view the error message on the
display. To clear the Alert, press the
right arrow key .
12
12
Troubleshooting
ESP-Me User Manual
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für RAINBIRD ESP-Me wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info