656994
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Three-digit, Seven-segment Display shows
the channel number or state of the radio.
Nine-digit Dot-matrix Display shows alphanumeric
messages, modes, and functional status of the radio.
NMEA Receiving valid SeaTalk or NMEA position data.
FUNC FUNC key has been pressed.
WX Radio in Weather Channel mode.
TX Radio in Transmit mode.
US US Frequency Group selected.
INT International Frequency Group selected.
1W 1 Watt Power Transmission mode.
Volume Level
Squelch Level
Indicators Illuminate during the following conditions:
DESENS Desensitized (local) Receiving mode.
MEM Active channel is stored in memory.
MULTI Active channel stored in Multi-Call memory.
SCAN Radio in Scan mode.
DSC DSC call mode; DSC log or DSC menu active.
ATIS Automatic Identification Transmission active.
RAY230E DISPLAY
Indicators
DSC ALL SHIPS CALL
Press the ALL SHIP key. Press the SQ UP/DOWN keys to toggle between SAFETY and URGENCY.
Press the ENT key to submit your selection. The prompt RECONFIRM is displayed. Press the ENT key to confirm.
Press and release PTT to transmit the SAFETY/URGENCY call. The radio switches to Channel 16.
Makes a DSC call to All Ships in the area when assistance is needed but the ship is not in distress. Select between
a SAFETY call for advisory alerts or an URGENCY call for assistance when life is not in immediate danger.
SQ
SCROLL
Press PTT to converse with receiving stations on Channel 16.
PTT
D5768-2
DSC DISTRESS CALL
Press PTT to speak with the acknowledging station on channel 16.
When a response is received, the LCD scrolls a message that the DISTRESS has been acknowledged, along
with the sending station's MMSI number or nickname. The message and alert are repeated until the CLR
key is pressed.
1. Press and hold the DISTRESS button. dSr flashes and DSC illuminates on display.
Lift the door labeled DISTRESS on the back of the handset.
Specifying the Type of Distress (OPTIONAL)
1. Press and release the DISTRESS button. dSr flashes and DSC illuminates on display.
2. Use the SQ UP and SQ DOWN keys to select the type of distress.
3. Press and hold the DISTRESS button to send.
Without Specifying the Type of Distress (QUICK)
Continue to hold the DISTRESS button for a 4 second countdown. Release the DISTRESS button after the
countdown has completed and the message RELEASE appears on the dot matrix display. The unit sounds
a loud alert tone, switches to channel 16 and monitors for acknowledgement.
OR
SQ UP/
DOWN
PRESS &
RELEASE
LIFT
DOOR
PRESS
& HOLD
LIFT
DOOR
Press and release CLR to mute the alert tone. This does not interrupt the Distress Call.
RELEASE
DISTRESS
HOLD
DISTRESS
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Raymarine RAY230E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Raymarine RAY230E

Raymarine RAY230E Bedienungsanleitung und Installationsanweisung - Deutsch - 135 seiten

Raymarine RAY230E Bedienungsanleitung - Englisch - 154 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info