HOW TO ADJUST THE BELT
The exercise cycle features a precision belt that must
be kept properly adjusted. If the belt causes exces-
sive noise or slips as you pedal, the belt should be
checked. To do
this, the left
side shield must
first be
removed. Refer
to the instruc-
tions on page
12 and remove
the left side
shield. Next,
use an
adjustable
wrench to turn the right pedal counterclockwise and
remove it. Remove the left side shield. Press down on
the centre of the Belt (16) between the front and rear
pulleys. There should be from 1/4” to 1” of vertical
movement in the centre of the Belt.
If the Belt (16) is properly adjusted, reattach the side
shields and pedals. If the Belt needs to be adjusted,
loosen the M8 Washer Nut (37) on each side of the
Flywheel (32).
To tighten the
Belt, turn the two
M6 Nuts (47)
clockwise; to
loosen the Belt,
turn the Nuts
counterclock-
wise. Make sure
that the Flywheel
is straight and
tighten the M8
Washer Nuts
(37). Reattach the side shields and pedals.
13
16
16
32
37
47