720057
4
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
4
PARTS
1. Power connector
2. Power button
3. Direction/speed controls
4. Lighted tip
5. Spindle
6. Needle Milling Cutter
7. Flame Milling Cutter
8. Sapphire Cone
9. Cylindrical Milling Cutter
10. Tapered Callus Rasp
11. Felt Cone
12. Sandpaper Barrel Attachment (10x rells)
13. Sapphire Disk (Fine)
Not shown:
14. Power Supply
15. Nail Clipper
16. Cuticle Pusher
17. Toe Separators (x2)
18. Cleaning Brush
19. Storage Case
INTRODUCTION
This manicure and pedicure device comes with 12 high-quality accessories and a number of
these are made with a durable sapphire coating and or/polishing felt. With a choice of two
speeds, fully lighted tip for precision detailing, together with right and left rotation, it is
possible to achieve salon quality results with the use of this device.
INSTRUCTIONS FOR USE
IMPORTANT:
During use, this device can create large amounts of heat through friction. Check the
results regularly during treatment. Pay attention if you, or persons being treated, are
insensitive to heat or have a lowered sensitivity to pain. If you have any doubts, consult
a physician.
Always start teatment on a low speed setting.
When treating calluses do not remove all of the callus so as not to compromise the
natural protection of the skin.
1. Connect the power supply to the power connector. Plug the power supply in to the
mains supply socket.
2. Ensure that the device is switched o.
3. Select the desired attachment and push it rmly into the spindle opening (FIG A).
4. Press the power button (C). The light will come on.
5. The device can rotate clockwise or anticlockwise. Select the direction by pressing one of
the direction/speed buttons (). This will start the device in the direction chosen at
low speed. Pressing the same button again will change the speed to high.
6. To stop the device, press the power button.
7. To remove an attachment, ensure that the device is switched o then pull the
attachment straight out of the spindle.
ENGLISH
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Remington MAN3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info