Bedienungsanleitung REMKO ASF100 (Seite 4 von 16) (Englisch)

587877

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

REMKO ASF 100

Unit description

Operation

The units can be switched on and

off with the ON/OFF button.

The LED of the last selected mode

lights up in the control panel.

The recirculation fan draws in the

humid room air via the inlet grille

with ﬁlter, condenser and follow-

ing adsorption rotor.

In the internal regeneration circuit,

the air ﬂows across a heating ele-

ment, dries the adsorption rotor

and passes the humid air through

the condenser.

On the cooler condenser, heat is

removed from the room air and

cooled to below dew-point. The

water vapour contained in the

room air deposits as condensate.

Depending on the room air tem-

perature and relative humidity,

the condensed water constantly

drips through the integrated drain

connection into the condensate

container located below.

The conditioned drier air continu-

ously mixes with the room air. Due

to the constant circulation of the

room air through the unit, the

relative humidity in the room is

gradually reduced to the required

humidity (45% relative humidity).

A ﬂoat switch in the condensate

container interrupts dehumidiﬁca-

tion via a microswitch when the

container is full. The units switch

off with an audible signal

(5x) and the „FULL TANK“ indica-

tor light illuminates on the control

panel. This does not extinguish

until the emptied condensate con-

tainer is reﬁtted. The units return

to the previously selected mode.

In an unsupervised continuous

mode with external condensate

connection, the produced

condensate is continuously drained

via a hose connection on the

condensate container.

The units are designed for

universal and problem-free

dehumidiﬁcation.

Owing to their compact size, they

are easy to transport and install.

The units operate according to the

adsorption principle and are pro-

vided with ioniser, low noise and

maintenance recirculation fans as

well as a power cord with plug.

The fully automatic control, the

condensate container with inte-

grated overﬂow protection and the

drain connection for direct con-

densate discharge ensure trouble-

free operation.

The units comply with the

fundamental safety and health

requirements of the pertinent EU

directives.

The units are reliable and easy to

operate.

The units are used wherever

dehumidiﬁcation is necessary and

consequential damage (e.g. due to

mould formation) is to be avoided.

The units are also suitable for

drying and dehumidiﬁcation of:

■

Living rooms, bedrooms,

shower or cellar rooms, lofts

■

Utility rooms, weekend homes,

caravans

■

Museums, archives, laboratories

■

Wellness areas, washrooms and

changing rooms, etc.

■

Garages, store rooms

The air ﬂow is cooled on its way through or via the condenser to

below the dew point. The water vapour condenses and is collected

in a condensate trap and discharged.

saturated air

condenser

condensate container

humid

room air

regenerative

heating element

adsorption rotor dehumidiﬁed

room air

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO ASF100 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO ASF100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info