Bedienungsanleitung REMKO GPM 35 (Seite 5 von 44) (Englisch)

587907

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Installation of the unit

Area of application

REMKO GPM series gas wall

heaters are used for heating small

areas such as workshops up to

large areas such as industrial halls,

sports facilities, etc.

For economical heating, correct

calculation of the heat demand for

the required heat output for the

room is essential.

General preconditions

For installation of the units,

the local and country-speciﬁ c

regulations and directives in the

latest version must generally be

observed.

The following work such as:

■

gas and electrical installation

■

change of gas type

■

commissioning

■

adjustment or maintenance

must only be carried out by

qualiﬁ ed specialists.

In addition to perfect electrical gas

installation, this ensures that all

necessary measurements and tests

are also carried out.

■

The units must be tested at

least once a year by authorised

specialists.

The units can constitute a hazard

if not installed and operated

correctly. Prior to planning and

installation of the units, the

following must be observed

■

The units must be installed and

operated so that there is no risk

to persons due to exhaust fumes

and radiated heat and ﬁ res

cannot occur

■

For installation of the units,

it must be ensured that the

discharging hot air has no

damaging effects on the

environment

■

Fire hazards must be prevented

depending on the materials of

the installation and mounting

surfaces. See TRGI, Section

5.1.3.3

■

Wall or ceilings intended for

mounting purposes must consist

of ﬂ ame retardant materials.

Their load-bearing capacity must

be veriﬁ ed, reinforcements must

be provided if necessary

■

Brackets must be securely

anchored to walls or ceilings and

the units fastened to the same

at the points provided at the

factory

■

Adequate maintenance options

for the heat exchanger, burner,

fan and chimney duct must be

provided

■

Operating devices for the unit

and fuel supply must be able to

be operated from ground level.

Maintenance and repair options

must be provided by the

operator

It is recommended to conclude

a maintenance agreement with

the specialised company for this

purpose

■

For planning and installation of

the chimney duct, the structural

possibilities and pertinent local

and country-speciﬁ c regulations

must always be observed

■

In environments subject to

heavy fouling, cleaning and

maintenance must be carried

out depending on the respective

conditions.

In these cases, the combustion

air must always be supplied

from the outside

Selecting the site of

installation

For selecting the site of installation,

account must be taken of the

requirements with respect to:

■

Fire protection and operational

risk

■

Function:

Room heating, low pressure

and excess pressure in the

installation room, etc

■

Operating requirements,

heat demand, nominal air

volume ﬂ ow, circulation air

requirements, humidity, room

temperature, air distribution,

space requirement

■

Mounting, repair and

maintenance options.

The units must be mounted so

that they are easily accessible

at all times for repairs and

maintenance

The units must not be installed

in rooms with an explosive or

corrosive atmosphere!

ATTENTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO GPM 35 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO GPM 35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info