587981
7
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
System setup
Operation
The unit is conveniently operated
using the fully automatic iChiLL
controller. If programming using
the indoor controller is possible only
with difficulty due to local condi-
tions, the unit can also be actuated
using the cabled remote control
(accessory) or an external, floating
enabling contact (serial equipment).
The standard equipment includes
a collective fault contact for the
external indication of a fault.
If the letter "A" with a two-
digit numeric code appears on
the display,
the chiller is malfunctioning
(See the "Troubleshooting and
customer service" chapter).
ATTENTION
The unit is designed for
a 2-pipe system.
The system has 2 medium pipes
(pipes for inlet flow and return) for
cooling with cold medium (KWG)
or for heating with hot medium
(units with heat pump function
(KWP)).
In combination with a correspond-
ing system, it is possible to intro-
duce the generated power to the
rooms being cooled through the
floor, building structure, or chilled
sails.
For all system variants, a minimum
volume flow rate and minimum
medium volume of the system
must be ensured.
Chiller
System setup
Medium inlet
Medium outlet
Indoor area 1
Outdoor area
Indoor area 2 Indoor area 3
Room temperature controller
Infrared remote control Cabled remote control
Cold water
consumer
Cold water
consumer
Cold water
consumer
Condensate line
Condensate line (only
units with heat pump
function)
Condensate line Condensate line
Collective condensate line
Operating possibilities
Collective
fault indicator
IPro controller
Cabled
remote control
Enabling contacts
ON/OFF Cooling/heating
(e.g., GLT)
(Serial equipment)
(Serial equipment)
(Accessory)
(Serial
equip-
ment)
Help save energy consumption
in standby mode! If the unit,
system, or components are not
used, we recommend that the
power supply be disconnected.
Safety-related components are
not subject to our recommen-
dation!
TIP
7
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO KWG500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO KWG500

REMKO KWG500 Bedienungsanleitung - Deutsch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info