587594
7
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
7
Automatic mode
In automatic mode, the control mechanism operates in cooling mode.
A target temperature of 24°C is permanently set. The range lies between 22°C and 26°
C. This can be increased or decreased by 1°C with the buttons.
Functional process
Functional process
COOLING MODE
MODUS
Cooling mode
In cooling mode, the room air is cooled to the set target temperature. The desired room
temperature is set in 1°C increments with the buttons. If the temperature is
1°C above the set target temperature, the indoor unit begins to cool the room air. If the
room temperature falls approx. 0.5°C below the set room temperature, the control
mechanism switches cooling mode off. To protect the compressor, the control mecha-
nism is first reactivated after 3 minutes have elapsed.
Dehumidifying mode
In dehumidifying mode, the room temperature is decreased to 24°C. Due to the low
temperature of the refrigerant, the temperature of the fin exchanger falls below the dew
point of the air. The excessive moisture in the air condenses on the fin-exchanger and
the room is dehumidified. The fan speed should be set to automatic to reach maximum
dehumidification capacity. In automatic mode, the fan switches on and off at intervals.
DEHUMIDIFICATION MODE
MODUS
Functional process
Heating mode
This mode is not available.
Mode button Use the MODE button to select the individual operating modes. There are 4 modes
available:
1. Automatic, automatic selection of cooling or heating mode
2. Cooling, operating mode primarily for summer
3. Dehumidifying, summer or winter operating mode
4. Heating, not available
Functional process
MODE MODE MODE MODE
Automatic Cooling Dehumidifying Heating
MODE
COOLING MODE
FAN button
The fan speed is selected with this button. You can select either low, medium, high or
automatic fan speed.
Functional process
FAN FAN FAN FAN
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO ML680 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO ML680

REMKO ML680 Bedienungsanleitung - Deutsch - 28 seiten

REMKO ML680 Bedienungsanleitung - Holländisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info