Bedienungsanleitung REMKO MXD520 (Seite 4 von 28) (Englisch)

587712

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Safety notes

Carefully read the operating in-

structions before commissioning the

equipment for service. It provides

useful tips and information as

well as hazard warnings to prevent

injury or material damage . Fail-

ure to follow the directions in this

manual can result in endangerment

to persons, the environment and

the equipment itself and will void

any claims for liability.

■ Keep this manual and the refrig-

erant data sheet near the unit.

■ The unit should be set up and in-

stalled only by qualified person-

nel.

■ The set-up, connection, and op-

eration of the unit and its com-

ponents must be in accordance

with the operating conditions

stipulated in this manual and

comply with all applicable local

regulations.

■ Mobile units must be set up

securely on suitable surfaces and

in an upright position. Station-

ary units must be permanently

installed for operation.

■ Modification of equipment and

components supplied by REMKO

is not permitted and can cause

malfunctions.

■ Equipment and components

may not be operated in areas

where there is an increased risk of

damage. Observe the minimum

clearances.

■ The electrical supply is to be

adapted to the requirements of

the equipment.

■ The operational safety of equip-

ment and components is only

assured if they are fully as-

sembled and used as intended.

Safety devices may not be modi-

fied or bypassed.

■ Do not operate equipment or

components with obvious de-

fects or signs of damage.

■ All housing parts and openings

in the device, e.g. air inlets and

outlets, must be free of foreign

objects, fluids, or gases.

■ The equipment and components

must be kept an adequate dis-

tance from flammable, explosive,

combustible, abrasive and dirty

areas or atmospheres.

■ Touching some parts of the

equipment can result in burns or

other injury.

■ Installation, repair and mainte-

nance work may be carried out

only by authorised specialists.

Visual inspections and cleaning

can be performed by the opera-

tor as long as power is discon-

nected from the equipment.

■ To preclude any danger from

the equipment, take appropri-

ate hazard-prevention measures

when performing installation,

repair or maintenance work or

cleaning the equipment.

■ The equipment or components

are not to be exposed to any me-

chanical stresses, extreme levels

of humidity or direct sunlight.

Disposal of packaging

All products are packed for trans-

port in environmentally friendly

materials. Make a valuable contribu-

tion to reducing waste and sustain-

ing raw materials. Only dispose of

packaging at approved collection

points.

Disposal of equipment

and components

Only recyclable materials are used

in the manufacture of the devices

and components.

Help protect the environment by

ensuring that the devices or com-

ponents (for example batteries) are

not disposed in household waste,

but only in accordance with local

regulations and in an environmen-

tally safe manner, e.g. using certi-

ﬁed ﬁrms and recycling specialists

or at collection points.

Warranty

Prerequisites for possible warranty

claims are that the ordering party or

their representative has completely

filled out the "warranty registration

card" and commissioning report

included with the unit at the time

when the equipment was pur-

chased and first put into operation

and returned it to:

REMKO GmbH & Co. KG and plac-

ing the unit in service.

The warranty conditions are listed

in the "General terms and condi-

tions". Furthermore, only the par-

ties to a contract can strike special

agreements beyond these condi-

tions. For this reason please contact

your contractual partner in the first

instance.

Environmental

protection

and recycling

REMKO MXD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO MXD520 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO MXD520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info