Bedienungsanleitung REMKO RKL350 (Seite 5 von 16) (Englisch)

587567

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

The unit’s primary function is to air-condition rooms. It

also filters and dehumidifies the air, thus creating a

comfortable climate in the room.

In “Fan” mode, the unit can also be used to circulate air

with no cooling effect.

The units operates fully-automatically and offers a

range of other options thanks to its microprocessor con-

trol. For example, it can be automatically switched off

and on at a preset time via the timer function.

The unit is comfortably operated via the control panel

on the indoor unit or via the infrared remote control that

comes with it.

Description of Device

The RKL 290-350 air conditioner comes with an infra-

red remote control and an air outlet hose with a flat

nozzle.

Operation

Prior to putting the unit into operation, ensure that all

safety instructions have been observed.

Please note that the unit operates most efficiently and

most comfortably when put into operation before the

hottest part of the day, e.g. the morning.

The selected target temperature should be 4 to 7°C be-

low the outside temperature. It should never be lower

because the room temperature would feel too cold

when coming from a non-air-conditioned room and peo-

ple may catch cold.

The selected target temperature does not affect the

performance of the unit! This means that when tem-

peratures in the room are high, it is not practical to ad-

just the unit to the lowest possible target temperature.

The unit has been designed for automatic, universal,

smooth air dehumidification. Its compact dimensions

make it easy to transport and set up in all rooms.

The unit meets the basic safety and health require-

ments found in the relevant EU regulations. It is safe

and easy to operate.

Functional principle

The portable air conditioner cools the air in the room by

extracting the heat from it. The heat absorbed is ex-

pelled to the outside via the exhaust hose and the

cooled air is resupplied to the room where the unit is in

operation via a fan.

Condensation that accumulates drips from the evapora-

tor onto the hot condenser where it condenses and is

then transported via the air outlet hose to the outside.

Excess condensation drips from the condenser into a

collection tray and is resupplied to the condenser by

means of a rotating wheel with blades, where it evapo-

rates and is then expelled with the outgoing air current.

Control panel

Air directing

plate fins

IR receiver

Transport

wheels

Recessed

grip

Condensation drain with

plug

Air outlet hose

Air intake

circulation

Air outlet exhaust

The environmentally-friendly refrigerant, R 407C, trans-

ports the absorbed heat within the closed-loop refriger-

ant cycle.

Cool circulating air in

the room

Warm air expel-

led to the outsi-

Evaporator

Condenser

Refrigerant

cycle

Fan for cir-

culation

Fan for out-

going air

Compressor

Expelled air intake

from the room

Circulation intake

from the room

Cable holder

Air intake exhaust

Air filter

circulation

Air filter exhaust

Air outlet

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

REMKO RKL350 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von REMKO RKL350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info