Bedienungsanleitung Renkforce 1208457 (Seite 3 von 6) (Deutsch, Englisch, Holländisch)

656688

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

• If the product casing is damaged, discontinue product usage! When it is

still connected to the mains, do not touch the radio switch socket or the

connected device! First, switch off the mains socket to which the radio

switch socket is connected (switch off at the circuit breaker). Only then

can you remove the radio controlled switch socket from the mains socket.

Take the product to a specialist workshop or dispose of it in an environ-

mentally friendly way.

Controls

A) Control-LED (lights up when the mains socket on the front is activated)

B) Front socket for connecting a consumer load with child-proof lock

C) Coding switch I, II, III, IV for one of the four address codes

D) Coding switch for switch channel selection 1, 2, 3, 4

E) Safety plug for connection to the mains socket

Setting the Address Codes

One of the four address codes (I, II, III, IV) can be set on both the handheld transmit-

ter and the radio controlled socket. Thus, several radio controlled switch sets can be

operated in parallel, without interfering with one another.

Select one of the address codes (I, II, III, IV) on the handheld transmitter. Set exactly

the same address code on the associated radio controlled socket(s); use a ﬂat screw-

driver to turn the coding switch (C).

If you set a different code on the handheld radio transmitter and the radio-

controlled switch socket, the switch socket will not react to the switching

commands on the handheld radio transmitter!

Setting the Switching Channel of the Radio Controlled

Switch Socket

On the back of the radio controlled switch socket there is another coding switch (D)

that is marked with the numbers “1”, “2”, “3” and “4”. It is used to select one of the

four switching channels (the handheld radio transmitter has also imprinted the num-

bers “1”, “2”, “3” and “4”) if more than one radio controlled switch socket is operated.

It is of course possible to set the same switching channel for two or more

radio controlled switch sockets. By this the two radio controlled switch so-

ckets are activated or deactivated by one keystroke.

Start-up, Function Test

Plug the radio controlled switch socket (without the consumer load connected!) into

the designated earthed mains socket.

You can now test the function of the radio controlled switch socket, by brieﬂy press-

ing the respective “ON” button for the corresponding switching channel (1, 2, 3 or 4).

The red control-LED (A) on the radio controlled socket lights up. The socket (B) on the

front is now activated; the mains voltage is available and a connected consumer load

is turned on.

Brieﬂy press the button “OFF”, for the switching channel, and the control-LED (A) is

turned off again; the mains voltage at the front mains socket (B) and thus, the con-

nected consumer load, is turned off.

Operating Instructions

Radio controlled switch socket, 433 MHz

Item no. 1208457

Intended Use

By using the radio controlled switch socket with the suitable handheld transmitter, a

consumer load connected to the radio controlled switch socket can be turned on or

off.

The radio controlled switch socket is only intended to be used in dry, closed indoor

locations.

It is powered via 230 V/AC, 50 Hz.

All the safety and operating instructions in this manual must be followed carefully.

These instructions not only protect the device but, in particular, your health. Please

read the entire operating manual before using the product.

This product complies with the applicable national and European requirements. All

names of companies and products are the trademarks of the respective owners. All

rights reserved.

Package contents

• 1 x radio controlled switch socket

• Operating instructions

Safety Instructions

Damages due to failure to follow these operating instructions will void the

warranty! We do not assume any liability for any resulting damage!

We do not assume any liability for material and personal damage caused

by improper use or non-compliance with the safety instructions. In such

cases, the warranty/guarantee will be null and void.

• The unauthorised opening, conversion and/or modiﬁcation of this product

is not permitted for safety and approval reasons (CE).

• Do not use this product in hospitals or medical institutions. Although the

product only emits relatively weak radio signals, these may lead to the

malfunction of life-support systems. The same may also apply to other

zones.

• The radio controlled switch socket is designed in accordance with pro-

tection class I. Only a standard mains socket (230V~/50Hz with protective

earth) for the public supply grid may be used as the power source for the

radio controlled switch socket.

• The product is not a toy and does not belong in the hands of children.

Therefore, be especially careful when children are around. Children might

try to push objects through the radio-controlled switch socket’s openings.

There is danger of a life-threatening electric shock!

•

Never touch the product and the mains plug, respectively, with wet or

damp hands when trying to connect to the radio controlled main socket.

There is danger of a life-threatening electric shock!

• Never remove a mains plug from the front of the radio switch socket by

pulling on the power cable. Always pull the plug from the socket, in the

radio-controlled switch socket, using the gripping surface provided on the

side.

• Do not connect adaptor plugs in series!

• The device is only voltage-free when it disconnected from the mains sock-

et.

• Do not overload the radio switch socket (take note of the input power in

the technical data at the end of the operating manual!).

• Do not leave packaging material carelessly lying around, since it could

become a dangerous plaything for children.

• Handle the product with care, it can be damaged by impacts, blows, or

accidental falls, even from a low height.

Renkforce 1208457 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info