Bedienungsanleitung Renkforce T-900B (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

491272

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Fuse replacement

If it becomes necessary to replace a fuse, make sure that only fuses of the prescribed type and nominal

current are used (see “Technical Data”).

You must not carry out your own repairs to fuses or bridge the fuse holder.

• Disconnect the monitor from the power supply.

• Unscrew the fuse holder in the red connection.

• Remove the defective fuse and replace it with a fuse of the same type.

• Close the fuse holder again.

• Only then the monitor should be re-connected to the car system and put into operation.

• Should the fuse trigger again, have the device repaired in a specialist workshop.

Disposal

a) Product

Electronic devices are recyclable waste materials and must not be disposed of in the household

waste!

Please dispose of the product, when it is no longer of use, according to the current statutory

requirements.

Remove the battery in the remote control and dispose of it separately from the product.

b) Batteries and Rechargeable Batteries

The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable batteries. Do

not dispose of used batteries in the household waste!

Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that

disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:

Cd=Cadmium, Hg=Mercury, Pb=Lead (marking can be seen on the battery/rechargeable bat-

tery, e.g., underneath the rubbish bin symbol shown on the left).

You can return used batteries/rechargeable batteries free of charge to any collecting point in your local com-

munity, in our stores or in any other store where batteries/rechargeable batteries are sold.

You thereby fulﬁ l your statutory obligations and contribute to the protection of the environment.

Technical Data

Operating voltage ..........................................12 V/DC

Power consumption .......................................500 mA

Battery for remote control ..............................3 V lithium button cell CR2025

Fuse ...............................................................T2AL/250V (5 x 20 mm)

Display size ...................................................22.9 cm (9”)

Display format ................................................16:9

Deﬁ nition ........................................................800 x 480

TV format .......................................................PAL/NTSC

Dimensions (without mounting frame) ...........226 x 157 x 30 mm

Installation opening ........................................163 x 232 mm

Mounting depth ..............................................24 mm

Range of operating temperature ....................0 – 50 °C

Weight ...........................................................490 g

These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁ lming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

Operation

(1) PHONE for the connection of a headset

(2) AV IN for the connection of external AV devices

(3) MODE toggles the display format (4:3/16:9)

(4) V1/V2 switches the video input (VIDEO 1 IN/VIDEO 2 IN)

(5) “-” turns the volume down or changes settings in the menu

(6) M is used to access the menu – the menu points are accessed by pressing several times, settings are

performed via the “-” and “+” keys

BRIGHTNESS brightness adjustment

CONTRAST contrast adjustment

SATURATION saturation adjustment

VOLUME volume adjustment

SOURCE selection of the input: VIDEO 1 IN/VIDEO 2 IN

RESET restore of factory settings

L/R mirroring of the display

U/D rotation of the display

16:9/4:3 switching of the display format

EXIT exiting the menu

(7) “+” turns the volume up or changes the settings in the menu

(8) POWER switches the monitor on/off

(9) Infrared receiver for the remote control

(10) Power indicator - lights up when the device is turned on

(1) MUTE – switches the sound on/off

(2) MD toggles the display format (4:3/16:9)

(3) L/R mirrors the display (e.g. for use of a reversing camera)

(4) U/D rotates the display by 180° (if the monitor has been hung up)

(5) AV switches the video input (VIDEO 1 IN/VIDEO 2 IN)

(6) ON/OFF switches the monitor on/off

(7) Adjustment of the display brightness

(8) Adjustment of the display contrast

(9) Adjustment of the saturation of the display

(10) Adjustment of the volume

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Renkforce T-900B Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info