Bedienungsanleitung Revitive Ultrasound Therapy (Seite 11 von 13) (Englisch)

788492

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

20 21

REVITIVE Ultrasound is intended for use in an electromagnetic environment in which

radiated RF disturbances are controlled. The user of REVITIVE Ultrasound can help prevent

electromagnetic interference by maintaining a minimum distance between portable and

mobile RF communications equipment (transmitters) and REVITIVE Ultrasound

as recommended below, according to the maximum output power of the

communications equipment.

Rated

maximum

output power

of transmitter

(W)

Separation distance according to frequency of transmitter (m)

150 KHz to 80

MHz

d= 3.5

�P

80 MHz to 800

MHz

d= 3.5

�P

800 MHz to 2.5 GHz

d= 7

�P

0.01 0.12 0.12 0.23

0.1 0.38 0.38 0.73

11.2 1.2 2.3

10 3.8 3.8 7.3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended

separation distance D in metres (M) can be estimated using the equation applicable to

the frequency of the transmitter, where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter manufacturer.

Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range

applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is

affected by absorption and reﬂection from structures, objects and people.

RECOMMENDED SEPARATION DISTANCES

BETWEEN PORTABLE AND MOBILE RF

COMMUNICATIONS EQUIPMENT AND EQUIPMENT

OR SYSTEMS THAT ARE NOT LIFE SUPPORTING.

Technical SpeciﬁcationsTechnical Speciﬁcations

REVITIVE Ultrasound is intended for use in the electromagnetic

environment speciﬁed below. The user of REVITIVE Ultrasound should assure that it is

used in such an environment.

Emission test Compliance Electromagnetic environment –

guidance.

RF emissions CISPR 11 Group 1

REVITIVE Ultrasound uses RF

energy only for its internal function.

Therefore, its RF emissions are very

low and are not likely to cause any

interference in nearby electronic

equipment.

RF emissions CISPR 11 Class B REVITIVE Ultrasound is suitable for

use in all establishments, including

domestic establishments and those

directly connected to the public

low-voltage power supply network

that supplies buildings used for

domestic purposes.

Harmonic

emissions IEC 61000-3-3 Class A

Voltage ﬂuctuations/ﬂicker

emissions IEC 61000-3-3 Complies

• Power Supply:

Input: AC 100-240V, 50/60 Hz, 0.35A Output: DC 15V, 1.2A

• Frequency: 1MHz (±10%)

• Mode: 3 levels (Low, Medium, High)

• Time: 5, 10 or 15 minutes with auto turn off

• Power Output: (0.7W/cm2 (Low), 1.0W/cm2 (Medium), 1.2W/cm2 (High)

• Duty Factor: 30% (Low), 40% (Medium), 50% (High)

• RBN : < 8.0

• Rated Output Power: 9.6W (±20%)

• Effective Intensity: 2.4W/cm2 (±20%)

• AER : 4 cm2

• Beam Type: Collimated

• Modulation Wave Shape: Pulsed

• Operating Conditions:

Temperature: 5-40°C Humidity: 30-75%RH Air Pressure: 700-1060hPa

GUIDANCE AND MANUFACTURER’S DECLARATION -

ELECTROMAGNETIC EMISSIONS FOR

ALL EQUIPMENT AND SYSTEMS

3269_IFU02_14269060.indd 20-21 24/07/2017 11:59

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Revitive Ultrasound Therapy Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info