670028
5
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
GB-4
OPERATING THE BLUETOOTH
AN external device with Bluetooth connectivity can be wirelessly connected to this
apparatus using the bluetooth function.
1. Set the FUNCTION selector (10) on BT position the blue light will begin to flash.
2. Turn your external device’s Bluetooth setting on, wait a moment, and then look for the
Bluetooth pairing name ”BV-T003”.
3. Select the Bluetooth pairing name, to connect the unit. Once connected, the blue light
will stop flashing.
4. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the device. If your device should become unpaired or you find it is unable
to connect, repeat the above steps.
5. Rotate the volume control knob to adjust the sound level.
A
USB RECORDING
UXILIARY INPUT
1. Set the FUNCTION button ( 10) on LINE IN position and then use an audio cable (included)
with a 3.5 mm stereo plug on each end of the cable.
2. Plug one end of the cable into the LINE IN jack ( 8 ) on the center board of the unit and the other
end into the Line-out jack or Headphone jack of your external audio device to be able to listen to the
external source through that system
’s speakers.
3. The volume level can now be controlled through the main unit. Operate all other functions on the
auxiliary device as usual.
Note:
If the Line-Out jack of your external device is connected, you only need to adjust the system’s volume
control. If your external device’s Headphone jack is connected, you may need to adjust the volume
control on both your external device and this syste
m
to achieve the desired volume.
TROUBLESHOOTING GUIDE
Problem Possible cause Solution
The unit does not
respond (no power)
The unit is disconnected from
the AC outlet.
The AC outlet has no power.
Connect to the AC outlet.
Try the unit on another outlet.
No sound
Volume not adjusted.
Wrong source selected.
Device not turned ON.
Volume set too low.
Adjust the volume level.
Select the correct source.
Turn ON the device.
Press the Volume + button to turn
the sound level up.
When you would like to record the music from the vinyl records, insert the USB flash
disk into the USB Record JACK (4), then press the USB REC Button (6), when you
finished the recording, please press the USB Record Button (6) again, and finish the
USB recording.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ricatech RTT25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info