Bedienungsanleitung Ring Video Deurbel (Seite 2 von 2) (Englisch)

629008

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

For best results, use type Li-Ion batteries. Install only new batteries

of the same type in your product. Failure to insert batteries in the

correct polarity, as indicated in the battery compartment, may

shorten the life of the batteries or cause batteries to leak. Do not mix

old and new batteries. Do not mix Alkaline, Standard (Carbon-Zinc) or

Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.

Do not dispose of batteries in ﬁre. Batteries should be recycled or

disposed of as per state and local guidelines.

Warning: Changes or modiﬁcations to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Hereby, Bot Home Automation, declares that this

consumer electronic is in compliance with the

essential requirements and other relevant provisions

of Directive 1999/5/EC. The declaration of conformity

may be consulted at www.ring.com/DoC.pdf.

Protect the device from direct sunlight. Install the device at dry

locations and protect it against rain and humidity. The device may not

get contact to salt water or other conductive liquids. The device must

be charged only within a building in a dry state.

RING, ALWAYS HOME, and CHIME are trademarks of Bot Home

Automation, Inc.

Step 7

Connect the Wires (optional)

Connect the wires coming out of

your wall to the screws on the

bracket. Note that it doesn’t matter

which wire connects to which screw.

The wiring must be connected

to a transformer with a voltage

of 8VAC – 24VAC and an internal

doorbell or resistor.

DC transformers and (therefore)

most intercoms are not supported.

If you have a digital doorbell,

connecting the diode the wrong way

won’t do any harm. If your doorbell

doesn’t ring, just reverse the diode.

Learn more at ring.com/diode

How and When to

Use the Diode

If your doorbell is digital (ie: plays a

melody), attach the included diode to

the two screws on your bracket.

If your doorbell is mechanical (ie: goes

“ding-dong”), DO NOT use the diode.

First make sure the

security screws are

loose.

Step 8

Attach Your Doorbell to the Bracket

Line up the holes in your Ring

Doorbell with the slots on the

bracket. Push firmly towards the wall

and then down until you feel a click.

Step 8

Secure Your Ring Doorbell

Use the star-shaped end of your Ring

screwdriver to tighten the security

screws on the bottom of

your Ring Doorbell.

Then restore

power at the

breaker.

Step 8

Bask in the pride of having installed

your Ring Video Doorbell!

Thanks for helping to make

your neighborhood safer.

Now push the front button

on your Ring to try it out.

Then check out the following

advanced features…

Shared Users

To let family or friends

answer live events and

view recordings (if cloud

recording is enabled), select

Shared Users on the settings screen of

the Ring app, and enter their email(s).

Motion Detection

To enable and customize

motion detection, select

Motion Settings on the

settings screen of the app.

Ring Light Patterns

The front light on your Ring Doorbell

uses a number of patterns to

communicate messages.

Here are some common ones:

Blue

Spinning

Front Button

Pushed

White

Solid

Wired

Charge

Percentage

Charging

White

Spinning

In Setup

Mode

White

Flashing

Updating

software

Blue Solid

Ring Speaker

Enabled

Answering Your Door

When someone is at your door, you

can perform the following actions:

Turning alerts on or off:

Disable/enable your

microphone

Mute/unmute your speaker

Zoom in/out

Access the Ring Plus menu

You can toggle

alerts for Rings or

Motions on or off

in the Ring app.

Cloud Video Recording

This optional feature saves events

captured by your Ring Doorbell.

You can access these events on any

device running the Ring app, or at:

ring.com/activity

To learn more about Cloud

Video Recording, visit:

ring.com/cloud-recording

With Ring, You’re Always Home

Ring Chime

Ring Chime is an optional add-on

that alerts you when you have a

visitor even if your phone is in the

other room.

Learn more at:

ring.com/chime

Never Miss a Ring

For additional help, visit:

ring.com/help

We’re available 7 days a week at:

US 1.800.656.1918 • help@ring.com

1523 26th St.

Santa Monica, CA

90404

Last updated:

05/10/16

11 12 13 14 15 16 17 18 19 20

Ring Video Deurbel Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ring Video Deurbel

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info