559816
5
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
5
REMOVABLE TEMPERATURE CONTROL PROBE
NOTE: Use Rival Removable Temperature Control Probe ONLY (NP-01A). Do not
use any other attachment plug or control.
Connecting the Removable Temperature Control Probe:
1. Ensure that the temperature control probe is unplugged from a wall outlet and on
the OFF setting before attaching to the griddle. To attach the temperature control
probe to the griddle, the locking switch should be in the up (vertical) position.
2. Align the temperature control probe with the terminal post of the griddle.
3. Gently slide the temperature control probe forward until it meets the pan.
4. Push the locking switch downward until a click is heard.
5. Before using, ensure the temperature control probe is locked into place and makes
intimate contact with the griddle. If the temperature control probe is loose it is not
assembled correctly and the griddle will not properly heat.
6. Ensure the dial is in the OFF position.
7. Plug into the wall outlet and then set dial to desired heat level.
8. The griddle is now ready for use.
Disconnecting the Removable Temperature Control Probe:
1. Turn the dial to the OFF setting and unplug the cord from the wall outlet.
2. Allow griddle to cool before disconnecting temperature control probe.
3. Firmly press the release button which is located on the side of the temperature
control probe. The locking switch will release.
4. Gently pull temperature control probe straight out to avoid any damage to the
temperature control probe or the terminal post of the griddle.
Locking Switch: to attach,
start in the up position and
then push downward to lock
(after aligning with the griddle
terminal post).
Alignment: properly align the
temperature control probe with
the terminal post on the griddle.
Release Button: to detach
the temperature control probe,
press the release button and
gently pull the handle away
from the griddle.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rival GR-825 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info