471684
4
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
English English
18. DISPLAYLOW /HIGHDIMMER
19. FMANTENNAWIRE
20. ACPOWERCORD
POWERSUPPLY
This unit operates from a main supply of 230V ~ 50Hz. Connect the
AC power cord to the AC household main outlet. Ensure that the
voltage is as indicated on the rating plate on the rear of the unit.
Battery Back-up Power Failure Protection
This radio has a battery back up circuit that will keep the correct time
and alarm settings in the event of a temporary power interruption.
Install a 3V CR2032 flat lithium battery (not included), into the battery
compartment located on the bottom of the unit.
If power is temporarily interrupted the display will blink and the radio
will not play. However, the battery back-up circuit will continue to
maintain the clock and alarm settings. When power is restored the
clock will display the correct time and alarm settings, and no
adjustment is necessary.
Note: Ifpoweris interruptedandthereisnobatteryinthecompartment
or the battery is exhausted. The time andalarm settings will be
lost. When power is restored the clock will begin to flash
indicating that the time and alarm settings must be corrected.
SETTINGTHECORRECTTIME
1. With the Radio Off, press and hold the TIME SET button (2).
2. PresstheHOURbutton(6)toadvancehour,pressMINUTE button
(4) until the correct time is displayed.
3. ReleasetheTIMESETButton.
SETTINGTHE WAKEUPTIME
1. Press and hold the ALARM SET button (8).
2. PresstheHOURbutton(6)toadvancehour,pressMINUTE button
(4) until the correct time is displayed.
3. Release the ALARM SET button.
WAKETOBUZZERALARM
1. Set the alarm time as shown above.
2. Set the ALARM SWITCH (3) to the BUZZER position.
3. Set the ALARM ON/OFF button (5) to ON (Clock icon appears).
WAKETOTHE RADIO
1. Set the alarm time as shown above.
2. Set the ALARM SWITCH (3) to the RADIO position.
3. Set the Band Selector (7) to the desired radio band, and follow
3 4
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roadstar CLR-2618 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info