Bedienungsanleitung Roadstar CLR-2981MP (Seite 4 von 22) (Deutsch, Englisch, Französisch, Italienisch)

528640

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

EnglishEnglish

COMPACT DISC OPERATION

• To remove a disc from its storage case, press down on the centre of the case and lift the

disc out, holding it carefully by the edges.

• Fingerprints and dust should be carefully wiped off the disc's recorded surface with a

soft cloth. Unlike conventional records, compact discs have no grooves to collect dust

and microscopic debris so gently wiping with a soft cloth should remove most particles.

Wipe in a straight line from the inside to the outside of the disc. Small dust particles and

light stains will have absolutely no effect on reproduction quality.

• Never use chemicals such as record sprays, antistatic sprays, benzine, or thinners to

clean compact discs. These chemicals can irreparably damage the disc’s surface.

• Discs should be returned to their cases after use. This avoids serious scratches that

could cause the Laser pickup to skip.

• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended

periods. Long exposure to high temperatures can warp the disc.

• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.

CD OPERATION

Loading and Unloading Compact Discs

1. Press the Function Selector (10) to the CD Position.

2. Press the Door Open button (22) to open the disc compartment (16).

3. When the door has opened, remove a disc from its case and place it carefully in the

compartment with the label side facing up. Locate 3” discs, on the central spindle in the

compartment.

4. Close the door by pressing on the corner of the disc compartment door.

PLAY BACK

1. Load a CD into the disc compartment, and close the compartment.

2. Press the Play/Pause (23) button. The Play/Prog indicator (26) will light up and disc play

POWER SUPPLY

This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power cord to the AC

household main outlet. Ensure that the voltage is as indicated on the rating plate on the rear

of the unit.

Battery Back-up Power Failure Protection

This radio has a battery back up circuit that will keep the correct time and alarm settings in

the event of a temporary power interruption.

Install a 2 x UM4 Battery, not included, into the battery compartment located on the back of the

unit (29).

Note:We recommend an alkaline battery for longer usable life. Change the battery every 9 to

12 months for best result and avoid possible battery leakage.

If power is temporarily interrupted the display will blink and the radio will not play. However,

the battery back-up circuit will continue to maintain the clock and alarm settings. When power

is restored the clock will display the correct time and alarm settings, and no adjustment is

necessary.

Note:If power is interrupted and there is no battery in the compartment or the battery is

exhausted. The time and alarm settings will be lost. When power is restored the clock

will begin to flash indicating that the time and alarm settings must be corrected.

RADIO OPERATION

1. Press the Stand-By / Alarm Off button (31)

2. Press the Function Button (10) to select the FM or MW RADIO Band.

3. Tune to the desired radio station by turning the Tuning control (7).

4. Adjust the Volume (2) control to the desired level.

5. To turn off the radio, Press the Function Button (10) to the OFF position.

Antenna

For FM reception there is a wire FM antenna (28) at the rear of the unit. Extend the antenna

and move it around to obtain the best reception.

For MW reception the signals are picked up through a built-in ferrite antenna. Your may have

to orient the unit to obtain the best reception.

FM Stereo and Mono Reception

The FM Stereo indicator (3) will light up when stereo signals are received.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar CLR-2981MP Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info