Bedienungsanleitung Roadstar SPK-200BT (Seite 2 von 10) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

592169

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

1 2

WARNINGS

This unit must not be exposed to moisture or rain.

This unit should be positioned so that it is properly ventilated.

Avoid placing it, for example, close to curtains, on the carpet or in

a built-in installation such as a bookcase.

Do not expose this unit to direct sunlight or heat radiating sources.

SPK-200BT/WH

HANDS FREE BLUETOOTH SPEAKER.

INSTRUCTION MANUAL

Please read this instruction manual carefully and familiarize yourself with your new

Bluetooth Speaker before using it for the first time. Please retain this manual for future

reference.

LOCATION OF CONTROLS

1. VOLUME UP / NEXT SONG 7. POWER ON / OFF SWITCH

2. VOLUME DOWN / PREVIOUS SONG 8. LIGHT INDICATOR

3. PLAY / PAUSE / PAIR BUTTON 9. Answering a call Button

4. MICROPHONE (hands free)

5. AUX IN INPUT

6. MINI-USB charging socket

CHARGING THE INTERNAL BATTERY

Remove carefully from the box the SPK-200BT and before starting using it, must be

recharged the internal Li-Po battery.

1) Connect the mini-USB cable (supplied) to any +5V USB 500 mA Power source (PC

or external AC Adapter).

2) When powered, the Light Indicatror (8) become RED.

POWER ON AND OFF

1) Move the Power switch (7) to switch ON the unit. Avoice says “POWER ON” can be heard

from the speaker. The Light indicator (8) become BLUE.

2) To power OFF the unit, move the Power button (7) to OFF.

BLUETOOTH PAIRING

After power the Speaker ON, the blue Light indicator (8) start blinking to indicate that

the Speaker is waiting for pairing to Bluetooth transmitter devices.

During this condition, enable the Bluetooth function on your mobile phone or tablet until the

identification name SPK-200BT compare in the display.

Press “confirm device” in your mobile device until the voice ”PAIRING” can be hear from the

SPK-200BT. In case if your Bluetooth device ask the passwotd, digit “0000”.

If the pairing operation has been done correctely, the blue Light indicator (8) flash slowely

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it

should not be disposed with other household wastes at the end of its

working life. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, please separate this from

other types of wastes and recycle it responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they

purchased this product, or their local government office, for details of

where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract. This product should not be mixed

with other commercial wastes for disposal.

English English

72 1

6 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar SPK-200BT Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info