Bedienungsanleitung Roadstar TTL-850USDE (Seite 5 von 9) (Deutsch, Englisch)

592102

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

EnglishEnglish 5 6

TURNTABLE OPERATION

Preparation

Open the Record Player Cover.

Listening to Records

5. Lift the Tonearm with the Tonearm Lift Lever.

6. Move the tonearm to the beginning of the record, or to the start of a particular track.

7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.

8. When the record is finished the tonearm will automatically stop and return to the rest .

9. To stop manually, lift the tonearm from the record and return it to the rest.

to the Tonearm. Reinstall the protective cap on the stylus when not in use.

How to suspend play

Setting the cueing lever to the UP position will lift the tone arm and then the play stops.

How to use manual cueing

The cueing lever is used when you want to momentarily interrupt the tone arm. Move the

lever gently to the "UP" position to interrupt the playing and to the "DOWN" position to

resume playing.

Keep the cueing lever in the down position when you are not using it.

central spindle when playing 17cm EP records.

3. Set the Speed Selector (5) to 33 or 45 rpm according to the record.

4. Release the tonearm clamp, and remove the protective cap from the stylus.

1. Set the power ON/OFF SWITCH (3) to ON position.

2. Place a record on the turntable, over the central spindle. Place the EP adapter over the

ENCODING OF PHONO INTO MP3 FILE

-The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz

- No song title will be recorded during encoding mode

- To interrupt the recroding, press the “ RECORD “ button again during record mode.

the USB or SD/MMC card.

The system is able to ENCODE TURNTABLE to MP3 format and recording at memory

media with USB / SD / MMC connecting port.

REMARK:

- The recording speed is 1:1 and according to the actual plying time of the track

- The system will creat a “ AUDIO “ folder and then store the encoding track in it.

10. To automatically stop the record, press the “EJECT” button (15).

Notes: Do not stop or turn the platter manually.

Moving or jarring the turntable without securing the Tonearm clamp could result in damage

PHONO ENCODING

Start playback at PHONO for the track which you want to record to USB.After

finishing of recoding, press and hold the “ RECORD “ button on the unit (12).

-Recording will be completed only entire song being encoded, if terminate the

encoding process intermediately, there is no track being recorded nor stored to

LED

USB Record Operation and LED Signal Indication:

1. USB storage device is not plugged. -> LED light is off

2. USB storage device is plugged in -> LED flashes

3. When the system is ready to record. -> LED light is on

4. Press REC button to start recording. -> LED blinks slowly.

5. Press SPLIT button to create new file in the recording.

6. Press REC button again to stop recording. -> LED is flashing for a short

time, and then LED light stably lights on again.

Note: Do not remove the USB storage device if the LED is flashing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar TTL-850USDE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info