Bedienungsanleitung Roadstar TTR-730U (Seite 4 von 14) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

592192

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

EnglishEnglish

3 4

MAINS (AC) OPERATION

This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power

sources may damage the unit.

CAUTION

To prevent electric shock disconnect from the mains before removing cover. No user serviceable

parts inside. Refer servicing to qualified service personnel.

SAFETY PRECAUTION

Do not allow this unit to be exposed to rain or moisture.

Mains Supply: 230V 50Hz - AC only

This symbol means that this unit is double insulated. An earth connection is not required.

POWER SUPPLY

Remove the stereo carefully from the box, retaining the packaging for future use.

AC POWER OPERATION

Connect the plug to a mains power inlet 230V AC ~ 50 Hz.

FM TUNER

Operation

• Set the Function Selector (6) to the FM/PHONO position.

• Tune to the desired radio station by turning the Tuning control (10/11).

• Adjust the Volume level (9) to the desired level

• To switch off the radio press for three seconds the ON/OFF button.

ANTENNA

• For FM reception there is a built-in FM antenna wire (17) at the rear of the unit. Move the wire

around to obtain the best reception.

FM & FM-STEREO RECEPTION

• Stereo reception is possible when the tuned FM station is broadcasting in stereo.

TURNTABLE OPERATION

Preparation

Open the Record Player Cover.

Release the Tonearm Clamp, and remove the stylus protector.

IMPORTANT! Unscrew the transport screw (15) before start playing the disc

Notes: Do not stop or turn the platter manually.

Moving or jarring the turntable without securing the Tonearm clamp could result in damage to the

Tonearm.

Replace the protective cap on the stylus when not in use.

AUX-IN FUNCTION

You can connect the external Audio signals to through the Line IN socket (16) with an cable (not

included).

SPECIFICATIONS

Power Supply

AC: 230V ~ 50Hz

Radio Frequency Coverage

FM: 87.5 - 108MHz

Output power 2 x 1.5 W RMS

Design and specifications are subject to change without notice.

Listening to Records

1. Set the Function Selector (6) to the FM/PHONO position.

2. Place a record on the turntable, over the central spindle. Place the EP adapter over the

central spindle when playing 17cm EP records.

3. Set the Speed Selector (14) to 33, 45 or 78 rpm according to the record.

4. Release the tonearm clamp, and remove the protective cap from the stylus.

5. Lift the Tonearm with the Tonearm Lift Lever (13).

6. Move the tonearm to the beginning of the record, or to the start of a particular track.

7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.

8. When the record is finished the tonearm will automatically stop and return from the

trecord to the rest .

9. To stop manually, lift the tonearm from the record and return it to the rest.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roadstar TTR-730U Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info