625561
41
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
40 V0913 NX SERIES
English
Planer belt tension:
Remove both cover plates of the thicknesser at both front and back side of the frame in order to get
access to the planer motor drive belts by lifting them up and taking them out. The drive belts for the
planer motor can easily be tightened by loosening the 4 nuts (1) holding the motor to the frame (g 35.)
The motor, under its own weight will lower and tighten the belts (belt type: SPZ 1400 (Robland n°
NSPZ1400).
Fig.35
Saw belt tension:
Tensioning the belts is done simply by loosening the bolts that holds the motor to the saw unit frame,
the motor, again under its own weight will tighten the belts (g. 36).
Belt type: for 250 mm dia. saw blade with or without scoring unit: SPZ545 (Robland n° NSPZ545).
For machines without scoring unit and 300 mm dia. saw blade: SPZ569 (Robland n° NSPZ569).
Fig.36
Changing and tension of the belts of
the 4-speed spindle (g. 37)
The machine is equipped with a 4 speeds spindle with a read out on the inner side of the machine,
which allows the user to read out the speed of the spindle when starting up. Before loosening the belt
to change the speed, loosen the belt spanner handle,then put the belt in the corresponding grooves to
the chosen speed. Fasten the handle and check the tension of the belt, you can push the belt between
the 2 pulleys, if the belt gives way approximately 5 or 6 mm, then the tension on the belt is right.
Replace the belt by a Robland belt type: SPZ-700 (9,5 x 700) number N8224.
1
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Robland NXSD 310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Robland NXSD 310

Robland NXSD 310 Bedienungsanleitung - Deutsch - 100 seiten

Robland NXSD 310 Bedienungsanleitung - Holländisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info