Bedienungsanleitung Robland Z3200 (Seite 4 von 70) (Deutsch, Englisch)

625577

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

Z3200 10-V0713 3

– English – Deutsch

Important instructions

when ordering spare parts

Always mention the following items on your order :

- Type of machine

- Serial number from manual

- Part number and quantity

- Your reference and correct phone and fax number

Attention

Working with woodworking machines can be extremely dangerous if the safety instructions are not

followed. It is recommended you systematically use the safety equipment installed on the machine.

Safety and maintenance instructions

Woodworking with machinery is a pleasant job that will give you a lot of satisfaction. Nevertheless,

working with a machine requires constant attention and care. Therefore, for your own safety, pay

attention to the instructions summarised in this chapter.

- The machine can only be used safely if the operator strictly follows the operating and safety

instructions.

- It is absolutely essential to read this manual before using the machine so you know how the

machine works and what its limitations are.

- Always make sure that all safety devices are tted to the machine and that the machine is

connected to a dust extraction system.

Also provide sufficient space around the machine and good lighting in the workshop.

- When changing the tools or when doing a maintenance job, the machine must always be

disconnected from its power supply.

- Knives and tools which are not correctly sharpened or are in bad condition not only diminish the

quality of the work, but also increase the risk of accidents.

- Always wear suitable clothing. Loose or torn clothes are very dangerous.

- Keep children away from the machine and the workshop.

- To avoid damaging your hearing we recommend you wear ear protection when working with the

machine.

When cutting narrow pieces always use a push stick. When damaged, replace the push stick at once.

- When cutting round workpieces, always make sure the workpiece is secured against slipping.

- Always use adapted jigs and templates and saw blades adapted to the work being carried out.

- Carefully read the recommendations for adjusting the brake of the main saw brake motor.

- Make sure all periodic maintenance work is done on time. These maintenance works may only

be carried out with the machine disconnected from the main power supply line thus rendering it

impossible to start the machine involuntarily.

- Read carefully the instructions for cleaning the machine, clean only with the machine disconnected

from it’s power supply line.

- Test on a weekly basis the following electrical components: emergency stops buttons, the safety

switchs on the saw unit and test if the machine can be started-up with open doors.

Test on a weekly basis if the run down time of the saw motor brake does not exeed the 10 seconds.

- Please read the noise emmision values in the manual.

- Handling of tools: always wear safety gloves when handling saw blades thus avoiding severe injury

to the hands. Please bear in mind that even blunt tools can cause serious damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robland Z3200 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robland Z3200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info