Bedienungsanleitung Rockford Fosgate PMX-2 (Seite 7 von 32) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

662891

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Settings

Source Unit Settings

To access the source unit’s settings, long press the MENU button until

the options appear. Rotate the encoder to scroll through the list of

settings and short press the encoder button to select the setting you

wish to change. (BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT

PAIRING>BEEP>TUNER REGION>SOFTWARE>FACTORY DEFAULT)

This source unit has a zero current draw when turned off. All of your

settings and presets will be saved along with your boat’s battery during

storage.

BALANCE

Short press the encoder button to access BALANCE adjustment settings.

Rotate the encoder button to set output BALANCE.

FADER

Short press the encoder button to access FADER adjustment settings.

Rotate the encoder button to set output FADER.

AUDIO

To access the AUDIO settings, short press the AUDIO option from

the MENU screen. Rotate the encoder to scroll through the list of

settings and short press the encoder button to select the setting you

wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR RCA>AUX

INPUT>SOURCE GAIN>INTERNAL AMPLIFIER)

7 BAND EQ

Short press the encoder button to access the 7 BAND EQ settings. Use

the rotary encoder to scroll through the EQ settings. (FLAT > ROCK

> CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP >

CUSTOM) When setting up the CUSTOM EQ, short press the encoder

button to set the ﬁrst frequency. Once active, rotate the encoder to adjust

the frequency settings. Short press encoder button again to access the

next frequency. Repeat until all EQ settings are complete. Short press the

MENU button to exit and go back up one level.

CROSSOVER

Short press to access the CROSSOVER settings. Use the rotary

encoder to select the crossover zone options (FRONT>REAR>SUB).

Short press the encoder to adjust the frequency of the crossover

(60Hz>80Hz>120Hz>APF). Short press MENU to exit and go back up

one level.

REAR RCA

Short press to access the REAR RCA options. Use the rotary encoder to

select options (LINE OUT>SUBWOOFER).

PUNCH EQ

Short press to access the PUNCH EQ settings. Use the rotary encoder

to adjust the gain output (0-12). Short press MENU to exit and go back

up one level.

Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to

+12dB boost at 12.5kHz

AUX INPUT

RENAME – To rename AUX, short press the encoder button to set the ﬁrst

letter of the new name. Once active, rotate encoder to adjust letters. Short

press the encoder button again to set the next letter. Repeat until AUX has

been renamed. Short press MENU to exit and go back up one level.

ENABLE - Short press the encoder button to access options. Rotate the

encoder button to select if unit is discoverable. (ENABLE > DISABLE)

SOURCE GAIN

To adjust the level of device input gain, scroll through the inputs (FM

TUNER>AM TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA)

to the device you want to adjust, short press the encoder button to access

the gain settings. Rotate the encoder button to set the level of gain. (-3dB

> -2dB > -1dB > 0dB > +1dB > +2dB > +3dB)

INTERNAL AMPLIFIER

Short press to access the INTERNAL AMPLIFIER options. Use the rotary

encoder to select options (ON>OFF). When using an ampliﬁer to power

your speakers, select OFF. If you are powering your speakers directly

from the source unit, select the INTERNAL AMPLIFIER to ON.

VOLTAGE GAUGE

To display the vehicle voltage, short press the encoder button on the

VOLTAGE GAUGE option.

BT DEVICE PAIRING

Short press the encoder button to access options. Rotate the encoder

button to select if unit is discoverable for pairing. (ENABLE > DISABLE)

Once enabled, the source unit is now discoverable and ready for pairing

to your device. Open the Bluetooth settings on your device to ﬁnd the

source unit labeled “Rockford PMX” and select.

BEEP

Short press the encoder button to access the BEEP options. Rotate the

encoder button to turn system beep ON/ OFF.

TUNER REGION

To adjust, short press the encoder button to access. Rotate the encoder

button to select the TUNER REGION of your preference. (EUROPE > USA

> RUSSIA > LATIN > ASIA > JAPAN > MIDEAST > AUSTRALIA)

SOFTWARE

VERSION - Short press the encoder button to display the current

ﬁrmware version of the unit.

UPDATE - Short press the encoder button to update the ﬁrmware. Follow

the instructions on the screen when updating.

FACTORY DEFAULT

AUDIO – Short press the encoder button to access. Rotate the encoder

button to select YES/NO. Selecting YES will reset your unit back to

factory default settings.

SYSTEM - Short press the encoder button to access. Rotate the encoder

button to select YES/NO. Selecting YES will reset your unit back to

factory default settings.

Basic Operation

TURNING THE UNIT ON / OFF

Long press the SRC (Power) button to turn the unit ON or OFF

ADJUSTING THE VOLUME

Rotate encoder knob left or right to desired volume level (0-40). The

current volume level will be displayed during adjustment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rockford Fosgate PMX-2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info