14
SPECIFICATIONS
Specifications subject to change without notice
MODEL- PUNCH 301X 501X 801X
Maximum Power Rating
All Channels 900 Watts 1500 Watts 2400 Watts
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel 40 Watts x 4 65 Watts x 4 100 Watts x 4
2Ω Load Per Channel 75 Watts x 4 125 Watts x 4 200 Watts x 4
4Ω Load Bridged 150 Watts x 2 250 Watts x 2 400 Watts x 2
Dimensions: (with Endbell)
Height 2.38" (6.05cm) 2.38" (6.05cm) 2.38" (6.05cm)
Width 9.85" (25.02cm) 9.85" (25.02cm) 9.85" (25.02cm)
Length 12.07" (30.66cm) 12.07" (30.66cm) 17.07" (43.36cm)
Battery Fuse Rating (Amp) 30A 50A 60A
(External to Amplifier) Not Supplied
Fuse Type ATC AGU AGU
Signal-to-Noise Ratio >100dB A-weighted
Crossover Slope 24dB/octave Butterworth
Crossover Frequency (Models 301X & 501X) Fixed 80Hz LP, AP, 120Hz HP
Crossover Frequency (Model 801X) variable from 50Hz to 250Hz
Frequency Response 20Hz to 20kHz ±0.5dB
Bandwidth 20Hz to 200kHz ±3dB
Damping Factor @ 4Ω (at output connector ) >200
Slew Rate 30 Volts/ms
IM Distortion (IHF) <0.05%
Acceptable Signal Voltage Range Variable from 250mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
Protection NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Equalization (45Hz Punch Bass) (Model 801X) Variable from 0dB to +18dB @ 45Hz
Input Impedance 20k ohms
