168822
4
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
1. Power LED (Top of unit) This Blue LED illuminates when the unit is turned on.
2. Thermal LED (Top of unit) This Red LED illuminates if the amplifier internal components become
too hot and engage the thermal protection.The amplifier will shut down to cool
if this occurs.
3.
Protect LED (Top of unit) This Yellow LED illuminates if a short circuit or too low of an impedance
is detected at the speaker connections.The amplifier will automatically shut down if
this occurs.
4. Output Display (Top of unit) – These LEDs simulate VU meters to display the real-time output of
the amplifier from - 00 (infinity) to +2dB. During normal operation the indicator should not reach
+2dB, as this indicates clipping.
5. Batt (Battery) Display (Top of unit) – These LEDs simulate VU meters to display the real-time
input voltage to the amplifier from 9 to 16 volts DC.
6.
Cast Aluminum Heatsink The cast aluminum heatsink of the Power amplifier dissipates heat
generated by the amplifier's circuitry.
7.
Speaker Terminals The heavy duty,nickel-plated wire connectors (
+
and -) will accept wire sizes from
8 AWG to 16 AWG.
8.
Remote Punch EQ (Optional Controller) The Remote Punch EQ connection is made with a RJ-45
cable and can be installed in a variety of ways for easy control access.The control is used to boost low
and/or high frequency information to overcome road noise.The remote overrides the Punch EQ on the
amplifier when connected.
NOTE: Previous (prior to 2007) Punch Bass and Para-Punch remotes will not work with these amplifiers.
9.
bd Sync Connection – These amplifiers have a 6 pin mini DIN connector.When operating two
amplifiers together in a bridged mode, a bd Sync cable must be used.This will allow the two
independent frequency carrier generators in each unit to be synchronized.
10. Punch EQ This control is a narrow band adjustment variable from 0dB to +18dB @ 45Hz with a
Gyrator based Punch EQ that eliminates fr
equency shift with boost.
4
DESIGN FEATURES
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rockford Fosgate t2500 1bd wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info