662922
3
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
54
Design Features
Power/Protect LED
Power LED illuminates blue when the unit is turned on. Protect
LED illuminates yellow if a short circuit or to low of an impedance
is detected at the speaker connections. Thermal LED illuminates
red when amplifier overheats. The amplifier will automatically shut
down if this occurs.
Speaker Terminals
The Speaker Terminals are nickel-plated
quick connect wire connectors (+ and -)
will accommodate 10 AWG. (T500X1br)
Speaker Terminals
The Speaker Terminals utilize 16 AWG 4-pin
Molex quick connect wire connectors (+ and -).
Signal Input
The RCA inputs are capable of accepting signal from ei-
ther high-level (speaker) to low-level(RCA). When utilizing
high-level for input signal the auto turn-on feature is active.
Output Clip Indicator
The output clip indicator works in conjunction with the in-
put level knob, illuminating to appropriate color depending
on the audio content used for the setup.
Intput Clip Indicator
The input clip indicator works in conjunction with the audio
source volume knob, illuminating red when audio source
reaches it’s clipping point.
Input Level Knob
The input level control is used to match
the output of the audio source.
Design Features
Punch EQ
A Gyrator based Punch EQ that eliminates frequency
shift with boost. This works along with the crossover
switch on the amplifier.
Power/REM Terminals
The power and ground quick connector will accommodate
4 AWG, while the remote will accommodate 8 AWG.(The
REM terminal is used to remotely turn-on and turn-off the
amplifier when +12V DC is applied.)
2/4 Channel Switch
Setting this switch to the 2CH. position, switches the inputs to
a 2-channel mode, allowing connection to only the front inputs
with a 4-channel output. (T400X4ad)
Crossover Switch
Selectable switch for High-Pass (HP) or
All Pass (AP) or Low-Pass (LP)
Variable Crossover
Is a built-in 12dB/octave Butterworth filter with
a crossover point variable from 50Hz to 250Hz.
illus.-1.1
Remote Punch Level Control
Remotely control the output level of the amplifier.
(T400X2ad & T500X1br)
Remote Punch Level Switch
When activated, this allows the use of a optional remote
Punch Level Controller. (T500X1br)
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rockford Fosgate T500X1br wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info