Bedienungsanleitung Roland AE-05 Aerophone GO (Seite 3 von 16) (Englisch)

708865

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Panel Descriptions

Battery case

If you are using the Aerophone GO on batteries, insert four

rechargeable Ni-MH batteries (AA).

& Refer to “Power Supply Settings” (p. 4).

Built-in speakers

Strap ring

Attach a neck strap here.

& Refer to “Attaching the Neck Strap” (p. 4).

Bite Control Switch

Switches bite control on/o.

If this is on, the force with which you bite the mouthpiece controls

the pitch. If this is o, natural vibrato is applied automatically.

Bluetooth LED (blue)

The LED indicates the Bluetooth connection status.

Lit Connected via Bluetooth

Blinking Waiting to connect via Bluetooth

Unlit Bluetooth o

Power LED (orange)

The LED indicates whether the power is on/o and the amount

remaining in the batteries.

Lit Power on

Blinking Batteries are low

Unlit Power o

[

] switch

Turns the power on/o, and turns Bluetooth on.

& Refer to “Turning the Aerophone GO on” (p. 4).

PHONES/OUTPUT jack

Connect this jack to your headphones or external speakers.

& Refer to “Connecting Your Headphones or External

Speakers” (p. 5).

Water drain

Drops of water will exit here. Wipe them o with a soft cloth.

Power Select Switch

Selects whether the Aerophone GO will use batteries or will take

its power from a USB AC adaptor.

& Refer to “Power Supply Settings” (p. 4).

USB Port

If you are powering the Aerophone GO from a USB AC adaptor,

connect the included USB cable (type A).

If you are using the dedicated app on an Android smartphone,

and feel that the sound is delayed, make connections using the

included USB cable (micro B or type C).

* Do not use any cable other than the included USB cables.

& Refer to “Power Supply Settings” (p. 4).

& Refer to “Using the Aerophone GO with the Smartphone”

(p. 8)

Cord hook

When using a USB cable, use this cord hook to secure it.

& Refer to “Secure to cord hook” (p. 3).

Connect the Included USB Cable

You can use one of these cables when supplying power to the

Aerophone GO from a USB AC adaptor, or when you want to

use a wired connection to connect the Aerophone Go with a

smartphone on which the dedicated app is installed.

* Handle USB cables with care. If saliva drips down the USB cable

and reaches the interior of the USB AC adaptor, malfunctions or

electrical shock might occur.

The types of included USB cable and the uses of each type are

shown below.

USB cable type Purpose

Type A

Powers the Aerophone GO from a USB AC

adaptor connected to the USB port.

Micro B

If you are using the dedicated app on an

Android smartphone, and feel that the

sound is delayed, make connections using a

USB cable.

Type C

To Aerophone GO

USB AC adaptor Smartphone

equipped with a

micro B port

Tablet

Smartphone

equipped with a

type C port

Tablet

Type A Micro B Type C

Secure to cord hook

If you use a USB cable, secure it

to the cord hook as shown in the

illustration.

This prevents the cable from being

inadvertently being unplugged if it is

pulled, and prevents the connector

from being stressed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AE-05 Aerophone GO Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AE-05 Aerophone GO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info