Bedienungsanleitung Roland BK-5 (Seite 4 von 6) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Setting the volume and other aspects of the real-time parts

4. Rotate the [CURSOR/VALUE] dial to select the desired

character, then use the TONE buttons.

You can press the [NUMERIC] button to switch between upper- and

lower-case characters as well as numbers. The [LWR] button can be

used to delete the selected character. The [UP2] button allows you

to insert a character.

5. Rotate the [CURSOR/VALUE] dial again to select the next

character position you want to change, then use the TONE

buttons to enter the next character.

6. Repeat the above steps (4) and (5) to complete the name.

7. Press the PERFORMANCE [WRITE] button.

A message conrms that the Performance has been renamed.

If you want to save the edited list, see “Saving the edited

Performance List” in the BK-5 owner’s manual.

Copying Performance

You can copy one, several or all Performances from one

Performance list to another. You can also copy and paste

Performance memories to dierent locations within their original

Performance List. And nally, you can copy “Music Assistant”

memories to one of your Performance lists.

1. Select the Performance memory you want to start to copy

from the list.

2. Press the [MENU] button.

3. Rotate the [CURSOR/VALUE] dial to select “Copy

Performance”, then press the [ENTER/SELECT] button.

The display changes to:

4. Rotate the [CURSOR/VALUE] dial to select one or several

Performances.

The selected Performances are displayed in reverse.

You can only select adjacent memories (either before or after the

Performance memory selected in step (1) above).

5. Press the [ENTER/SELECT] button to conrm your selection.

6. Select the Performance List to which you want to copy the

selected Performance memory/memories.

To load another performance press the [LIST] button and select

another Performance list. See “Loading a Performance/‘Music

Assistant’/‘Factory Songs’ List” in the BK-5 owner’s manual.

MEMO

You can choose to paste the selected Performances in the same

Performance List.

7. Select the Performance memory that should contain (the

rst) Performance memory you copied.

8. Press the [MENU] button.

Note the “Paste” option in the “Edit” list, which wasn’t there before

you started copying Performance memories.

9. Rotate the [CURSOR/VALUE] dial to select “Paste”, then

press the [ENTER/SELECT] button.

The Performance memories you copied are pasted to the location

you selected. If you copied several memories, they will be pasted to

subsequent locations.

A message conrms the operation.

If you want to save the edited list, see “Saving the edited

Performance List” in the BK-5 owner’s manual.

Setting the volume and other

aspects of the real-time parts

The BK-5 provides you an easy way to change the volume, reverb,

chorus and panpot of the Upper1, Upper2, Lower and Melody

Intelligent parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info