Bedienungsanleitung Roland BT-1 (Seite 3 von 16) (Englisch)

709222

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

IMPORTANT NOTES

Placement

• Do not expose the unit to direct sunlight, place

it near devices that radiate heat, leave it inside

an enclosed vehicle, or otherwise subject it to

temperature extremes. Excessive heat can deform or

discolor the unit.

• When moved from one location to another where the

temperature and/or humidity is very dierent, water

droplets (condensation) may form inside the unit.

Damage or malfunction may result if you attempt to

use the unit in this condition. Therefore, before using

the unit, you must allow it to stand for several hours,

until the condensation has completely evaporated.

• Do not allow rubber, vinyl, or similar materials to

remain on this unit for long periods of time. Such

objects can discolor or otherwise harmfully aect

the nish.

Maintenance

• For everyday cleaning wipe the unit with a soft,

dry cloth or one that has been slightly dampened

with water. To remove stubborn dirt, use a cloth

impregnated with a mild, non-abrasive detergent.

Afterwards, be sure to wipe the unit thoroughly with

a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of

any kind, to avoid the possibility of discoloration

and/or deformation.

Additional Precautions

• Use a reasonable amount of care when using

its output jack. Rough handling can lead to

malfunctions.

• When disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will

avoid causing shorts, or damage to the cable’s

internal elements.

• This instrument is designed to minimize the

extraneous sounds produced when it’s played.

However, since sound vibrations can be transmitted

through oors and walls to a greater degree than

expected, take care not to allow these sounds to

become a nuisance others nearby.

• The rubber portion of the striking surface is treated

with a preservative to maintain its performance.

With the passage of time, this preservative may

appear on the surface as a white stain, or reveal how

the pads were struck during product testing. This

does not aect the performance or functionality

of the product, and you may continue using it with

condence.

• Continuous playing may cause dis-coloration of the

pad, but this will not aect the Pad’s function.

ROLAND CORPORATION.

Roland, V-Drums, and OCTAPAD are either registered trademarks or trademarks of Roland Corporation in the United

States and/or other countries.

CAUTION

Avoid climbing on top of the unit, or placing

heavy objects on it

Never climb on top of, nor place heavy

objects on the unit.

CAUTION

Keep small items out of the reach of children

To prevent accidental ingestion of the

parts listed below, always keep them out of

the reach of small children.

• Included Parts

Bolts, Spacers (p. 4)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BT-1 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info