97865

Roland E-09 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
3
Roland E-09 MIDI Implementation
Entry messages (Controller number 6) to specify the value of the specified parameter. Once
an NRPN parameter has been specified, all Data Entry messages received on that channel
will modify the value of that parameter. To prevent accidents, it is recommended that you
set RPN Null (RPN Number = 7FH 7FH) when you have finished setting the value of the
desired parameter. Refer to “5. Supplementary material”, Examples of actual MIDI
messages [Example 4] (p. 18). On the E-09, Data entry LSB (Controller number 38) of NRPN
is ignored, so it is no problem to send Data entry MSB (Controller number 6) only (without
Data entry LSB).
On the E-09, NRPN can be used to modify the following parameters.
NRPN Data entry
MSB LSB
MSB Function and range
01H 08H mmH Vibrato Rate (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 09H mmH Vibrato Depth (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 0AH mmH Vibrato Delay (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 20H mmH TVF Cutoff Frequency (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 21H mmH TVF Resonance (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 63H mmH TVF&TVA Envelope Attack Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 64H mmH TVF&TVA Envelope Decay Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
01H 66H mmH TVF&TVA Envelope Release Time (relative change)
mm: 00H - 40H - 7FH (-64 - 0 - +63)
18H rrH mmH Drum Instrument Pitch Coarse (relative change)
rr: Drum Instrument note number
mm: 00H - 40H - 7FH (-64 - 0 - +63 semitone)
1AH rrH mmH Drum Instrument TVA Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)
1CH rrH mmH Drum Instrument Panpot (absolute change)
rr: Drum Instrument note number
mm: 00H, 01H - 40H - 7FH (random, left - center - right)
1DH rrH mmH Drum Instrument Reverb Send Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)
1EH rrH mmH Drum Instrument Chorus Send Level (absolute change)
rr: Drum Instrument note number
mm: 00H - 7FH (0 - max)
* Parameters marked “relative change” will change relatively to the preset value(40H).
Even among different GS devices, “relative change” parameters may sometimes differ in
the way the sound changes or in the range of change.
* Parameters marked “absolute change” will be set to the absolute value of the parameter,
regardless of the preset value.
* Data entry LSB (llH) is ignored.
❍
RPN MSB/LSB (Controller number 101, 100)
Status
2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
* Not received when Rx.RPN = OFF.
* The value specified by RPN will not be reset even by messages such as Program Change
or Reset All Controller.
**
RPN
**
The RPN (Registered Parameter Number) messages are expanded control changes, and each
function of an RPN is described by the MIDI Standard.
To use these messages, you must first use RPN (Controller number 100 and 101, their order
does not matter) to specify the parameter to be controlled, and then use Data Entry
messages (Controller number 6, 38) to specify the value of the specified parameter. Once an
RPN parameter has been specified, all Data Entry messages received on that channel will
modify the value of that parameter. To prevent accidents, it is recommended that you set
RPN Null (RPN Number = 7FH 7FH) when you have finished setting the value of the
desired parameter. Refer to “5. Supplementary material”, Examples of actual MIDI
messages [Example 4] (p. 18).
On the E-09, RPN can be used to modify the following parameters.
RPN Data entry
MSB LSB
MSB LSB Function and range
00H 00H mmH llH Pitch Bend Sensitivity
mm: 00H - 18H (0 - 24 semitones),
Initial value = 02H (2 semitones)
ll: ignored (processed as 00H)
specify up to 2 octaves in semitone steps.
00H 01H mmH llH Channel Fine Tuning
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.99 cents),
Initial value = 40 00H (+/- 0 cent)
Refer to “5. Supplementary material”, About the Tuning (p. 19).
00H 02H mmH llH Channel Coarse Tuning
mm: 28H - 40H - 58H (-24 - 0 - +24 semitones),
Initial value = 40H (+/- 0 semitone)
ll: ignored (processed as 00H)
00H 05H mmH llH Modulation Depth Range
mm: 00H - 04H (0 - 4 semitones)
ll: 00H - 7FH (0 - 100 cents), 100/128 Cent/Value
7FH 7FH --- --- RPN null
Set condition where RPN and NRPN are unspecified. The data
entry messages after set RPN null will be ignored. (No Data entry
messages are required after RPN null). Settings already made will
not change.
mm, ll: ignored
●
Program Change
Status
2nd byte
CnH ppH
n = MIDI channel number: 0H - FH (ch.1 - 16)
pp = Program number: 00H - 7FH (prog.1 - prog.128)
* Not received when Function: Prog Change = OFF. (Initial value is ON)
* Not received when Rx.PROGRAM CHANGE = OFF. (Initial value is ON)
●
Channel Pressure
Status
2nd byte
DnH vvH
n = MIDI channel number: 0H - FH (ch.1 - 16)
vv = Channel Pressure: 00H - 7FH (0 - 127)
* Not received when Rx.CH PRESSURE (CAf) = OFF. (Initial value is ON)
* The resulting effect is determined by System Exclusive messages. With the initial
settings there will be no effect.
●
Pitch Bend Change
Status
2nd byte 3rd byte
EnH llH mmH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* Not received when Function: Pitch Bend = OFF. (Initial value is ON)
* Not received when Rx.PITCH BEND = OFF. (Initial value is ON)
* The resulting effect is determined by System Exclusive messages. With the initial
settings the effect is Pitch Bend.
■
Channel Mode Messages
●
All Sounds Off (Controller number 120)
Status 2nd byte 3rd byte
BnH 78H 00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
* When this message is received, all currently sounding notes on the corresponding
channel will be turned off immediately.
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland E-09 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland E-09

Roland E-09 Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info