652876
15
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
15
Deutsch
Français Italiano Español
Português
Nederlands
EnglishEnglish
Formatting a USB Flash Drive
NOTE
When you execute the format operation, all data on the USB ash drive will be erased.
1. Connect the USB ash drive to the TD-25.
2. In the SETUP screen (p. 12), select “USB Memory Format.
The USB MEMORY FORMAT screen appears.
3. Press the [F3] (FORMAT) button.
The conrmation screen appears.
4. Press the [F3] (OK) button.
The USB ash drive will be formatted.
If you press the [F1] (CANCEL) button, formatting will be canceled.
Saving Just One Kit
* Before using a USB ash drive for the rst time, you must format it on the TD-25 (p. 15).
1. Connect the USB ash drive to the TD-25.
2. In the KIT screen, select the kit that you want to save (p. 5).
3. In the SETUP screen (p. 12), select “Save 1 Kit.
The SAVE 1 KIT screen appears.
4. Use the [INSTRUMENT] knob to select the backup destination
number (1–999).
If you press the [F2] (NEW) button, the lowest number in which no kit is
saved will be selected.
You can save 999 backups (1–999).
5. Press the [F3] (SAVE) button.
The display shows the backup name.
6. Press the [F3] (OK) button.
The settings of the drum kit that you selected in step 2 are saved to the
USB ash drive.
* Backup kit les are saved in the Roland/TD-25/Kit folder of the USB ash drive.
Loading One Kit
1. Connect the USB ash drive to the TD-25.
2. In the KIT screen, select the loading-destination kit (p. 5).
3. In the SETUP screen (p. 12), select “Load 1 Kit.
The LOAD 1 KIT screen appears.
4. Use the [INSTRUMENT] knob to select the kit number that
you want to load.
5. Press the [F3] (SAVE) button.
The conrmation screen appears.
6. Press the [F3] (OK) button.
The settings of the kit loaded from the USB ash drive are overwritten
onto the kit that you selected in step 2.
If you press the [F1] (EXIT) button, loading will be canceled.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland TD-25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland TD-25

Roland TD-25 Bedienungsanleitung - Deutsch - 18 seiten

Roland TD-25 Bedienungsanleitung - Holländisch - 18 seiten

Roland TD-25 Bedienungsanleitung - Französisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info