Bedienungsanleitung Roland TD-25 (Seite 18 von 18) (Englisch)

652876

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

IMPORTANT NOTESUSING THE UNIT SAFELY

WARNING

To completely turn o power to the unit, pull out the plug

from the outlet

Even with the power switch turned o, this unit is

not completely separated from its main source of

power. When the power needs to be completely

turned o, turn o the power switch on the unit,

then pull out the plug from the outlet. For this

reason, the outlet into which you choose to connect the power

cord’s plug should be one that is within easy reach and readily

accessible.

Concerning the Auto O function

The power to this unit will be turned o

automatically after a predetermined amount of

time has passed since it was last used for playing

music, or its buttons or controls were operated

(Auto O function). If you do not want the power

to be turned o automatically, disengage the Auto O function

(p. 16).

Use only the stand that is recommended

This unit should be used only with a stand that is

recommended by Roland.

Do not place in a location that is unstable

When using the unit with a stand recommended

by Roland, the stand must be carefully placed so

it is level and sure to remain stable. If not using

a stand, you still need to make sure that any

location you choose for placing the unit provides

a level surface that will properly support the unit, and keep it

from wobbling.

Precautions regarding placement of this unit on a stand

Be sure to follow the instructions in the Owner’s

Manual of the stand carefully when placing this

unit on a stand (p. 17).

If it is not set up properly, you risk creating an

unstable situation which could lead to the unit

falling or the stand toppling, and may result in injury.

Use only the supplied AC adaptor and the correct voltage

Be sure to use only the AC adaptor supplied with

the unit. Also, make sure the line voltage at the

installation matches the input voltage specied

on the AC adaptor’s body. Other AC adaptors

may use a dierent polarity, or be designed

for a dierent voltage, so their use could result in damage,

malfunction, or electric shock.

Use only the supplied power cord

Use only the attached power cord. Also, the

supplied power cord must not be used with any

other device.

Repairs and Data

• Before sending the unit away for repairs, be sure to make

a backup of the data stored within it; or you may prefer to

write down the needed information. Although we will do

our utmost to preserve the data stored in your unit when we

carry out repairs, in some cases, such as when the memory

section is physically damaged, restoration of the stored

content may be impossible. Roland assumes no liability

concerning the restoration of any stored content that has

been lost.

Additional Precautions

• Any data stored within the unit can be lost as the result

of equipment failure, incorrect operation, etc. To protect

yourself against the irretrievable loss of data, try to make a

habit of creating regular backups of the data you’ve stored

in the unit.

• Roland assumes no liability concerning the restoration of

any stored content that has been lost.

• Never strike or apply strong pressure to the display.

• This instrument is designed to minimize the extraneous

sounds produced when it’s played. However, since sound

vibrations can be transmitted through oors and walls to a

greater degree than expected, take care not to allow these

sounds to become a nuisance others nearby.

• Do not use connection cables that contain a built-in resistor.

Using External Memories

• Please observe the following precautions when handling

external memory devices. Also, make sure to carefully

observe all the precautions that were supplied with the

external memory device.

• Do not remove the device while reading/writing is in

progress.

• To prevent damage from static electricity, discharge all

static electricity from your person before handling the

device.

CAUTION

Use only the specied stand(s)

This unit is designed to be used in combination

with specic stands (MDS-9V, MDS-9SC, MDS-4V)

manufactured by Roland. If used in combination

with other stands, you risk sustaining injuries

as the result of this product dropping down or

toppling over due to a lack of stability.

Evaluate safety issues before using stands

Even if you observe the cautions given in the

owner’s manual, certain types of handling may

allow this product to fall from the stand, or cause

the stand to overturn. Please be mindful of any

safety issues before using this product.

Keep small items out of the reach of children

To prevent accidental ingestion of the parts listed

below, always keep them out of the reach of small

children.

• Included Parts

Screws

About Copyrights/Licenses/Trademarks

• It is forbidden by law to make an audio recording, video

recording, copy or revision of a third party’s copyrighted

work (musical work, video work, broadcast, live

performance, or other work), whether in whole or in part,

and distribute, sell, lease, perform, or broadcast it without

the permission of the copyright owner.

• Do not use this product for purposes that could infringe on a

whatsoever with regard to any infringements of third-party

copyrights arising through your use of this product.

• The copyright of content in this product (the sound

waveform data, style data, accompaniment patterns, phrase

data, audio loops and image data) is reserved by Roland

Corporation.

• Purchasers of this product are permitted to utilize said

content (except song data such as Demo Songs) for the

creating, performing, recording and distributing original

musical works.

• Purchasers of this product are NOT permitted to extract

said content in original or modied form, for the purpose

of distributing recorded medium of said content or making

them available on a computer network.

• MMP (Moore Microprocessor Portfolio) refers to a patent

portfolio concerned with microprocessor architecture, which

was developed by Technology Properties Limited (TPL).

Roland has licensed this technology from the TPL Group.

• MPEG Layer-3 audio compression technology is licensed

from Fraunhofer IIS Corporation and THOMSON Multimedia

Corporation.

• ASIO is a trademark and software of Steinberg Media

Technologies GmbH.

• This product contains eParts integrated software platform of

eSOL Co.,Ltd. eParts is a trademark of eSOL Co., Ltd. in Japan.

• Roland, V-Drums, and Noise Eater are either registered

trademarks or trademarks of Roland Corporation in the

United States and/or other countries.

• Company names and product names appearing in this

document are registered trademarks or trademarks of their

respective owners.

Please read this in conjunction with the leaet “USING THE UNIT SAFELY.”

Roland TD-25 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland TD-25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info