714280
24
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
24
• The appliance is designed for a max. continuous operation time of
2 minutes under full loading. If this time has been reached, the appliance
has to cool down for at least 10 minutes. If this is not observed, the motor
might be damaged!
• Prior to each use make sure the blade unit and the gasket are positioned
correctly and the blade unit got screwed in tightly!
Attention: Hazard of injury! The appliance has a delayed motor stop –
therefore, do not remove the top cover from the glass jar before it has
stopped!
Attention: Hazard of injury! Do not touch the running blade
neither stir in the glass jar with a spoon or other objects!
Attention: Hazard of injury! Mind a secure fitting of the cover. Only
work with top cover closed firmly!
NOTE: Before using the appliance, ensure a correct assembly of the unit. Especially check whether blade unit and
gasket are fitted well and the blade was screwed in firmly!
HINWEIS: If the power plug is connected to the mains (with rotary knob in ON position or in between MIN and
MAX), the electronic system recognizes an operating error. Another operating error is recognized if the jug is lifted
at a rotary knob position other than „OFF”. This safety function averts an unintended activation of the appliance.
For remedy simply unplug the appliances and turn the rotary knob to OFF-position.
Filling the glass jar
The appliance must be switched off. For this turn the rotary knob to the left to OFF-position and disconnect the
power plug.
Remove the top cover from the glass jar.
Fill the glass jar with food (observe the max. filling quantity!).
Place the top cover with attached measuring cup on the glass jar and press it on firmly. The plastic lip must cover
the spout.
Starting/stopping the appliance
Before plugging the appliance in, make sure that the rotary knob is in OFF-position!
Connect the appliance to the mains, now the unit is in the standby-mode, displayed by a permanently glowing LED
pilot lamp behind the decorative ring.
Now turn the rotary knob to ON-position and the unit is in ON-mode, displayed by a blinking of the 3 LED pilot
lamps of the function buttons.
Operating the appliance
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rommelsbacher MX1200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info