Bedienungsanleitung Rosieres HOA 03 VX SC (Seite 18 von 20) (Englisch, Französisch)

594723

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

7. CHILD SAFETY

18 GB

6. PYROLYTIC CYCLE

**Oven must have this function

The oven is equipped with a pyrolyser cleaning system, which

destroys food residues at high temperature.The operation is carried

out automatically by means of the programmer.The resulting fumes

are rendered “clean” by passing over a Pyrolyser wich starts as soon

as cooking begins. As very high temperatures are required by the

Pyrolyser, the oven door is fitted with a safety lock.

The pyrolyser can be stopped at any time. The door cannot be opened

until the safety lock is displayed.

NOTE : If a hob has been fitted above the oven, never use the gas

burners or the electric hot-plates while the Pyrolyser is working, this

will prevent the hob from overheating.

TWO PYROLYTIC CYCLE are pre-set.

. ECO PYROCLEAN : Cleans a moderately stained oven.Operates

for a period of 65 minutes.

. SUPER PYROCLEAN : Cleans a heavily stained oven.Operates for

a period of 90 minutes.

Never use commercially available cleaning products on a

Pyrolytic oven !

Tip : Carrying out Pyrolytic cleaning immediately after cooking allows

you to take advantage of residual heat, thus saving energy.

Before carrying out a Pyrolytic cycle :

•Remove all accessories from the oven : They cannot withstand the

high temperatures and would be damaged by pyrolytic temperatures.

•Remove any large spillages or stains as it would take too long to

destroy them. Also excessively large amounts of grease could ignite

when subject to the very high temperatures of the Pyrolyticcycle.

•Close the oven door.

•Excess spillage must be removed before cleaning.

Using the pyrolytic cycle :

1- Turn the function selector knob to “Pyrolytic Mode”. “PYRO” will

appear on screen. ECO mode flashes.

Remember : ECO - cycle of 65 minutes - moderately stained oven

SUP - cycle of 90 minutes - heavily stained oven

2- By using the central button select the required Pyrolytic mode,

according the degree of staining : ECO or SUP.

• Your choice is confirmed after 3 seconds...

The oven starts the pyrolytic cycle. The pyrolytic mode selected

flashes and the “time” and “stop” indicator lights will appear.

During the pyrolytic cycle, the locking oven door appears, it indicates

that the door is locked. The cooling fan will operate.

The indicator light flashes until the temperature required is not

reached and then it becomes fixed.

* The start of the pyrolytic cycle can be delayed by selecting an end of

time. Turn the programmation control knob to the end of time and set

the end of time required.

•During self-cleaning pyrolytic operation the surfaces may get hotter

than usual and children should be kept away.

At the end of the pyrolytic cycle the oven will automatically switch

off.

For 15 seconds, an audible signal lets you know that the cycle has

ended and the “time” and “Stop” indicator lights will flash.

•Turn the function knob to stop. Unless you do this, the

symbols will continue flashing. The symbol “Pyro” disappears on the

Timer, the pyrolytic mode. The oven door will remain locked until the

temperature is high. So, as the locking oven door is light, the oven can

not be opened.

The cooling fan does not switch itself off until the temperature of the

oven components is reasonable.

At the end of the cycle, the indicator flashes again, it will remain also

turned on after having extinguished the oven and it will estinguish

when the inside temperature of the oven is sufficiently low.

Pyrolysis leaves a white residue on the oven walls. Wait for the oven to

cool completely then clean the inside of the oven with a damp sponge

to wipe off the residue.

This function is essential, especially when children are around. It

prevents children from switching the oven on or altering the preset

programmes.

This safety system locks the oven control panel while it is operating.

There are two levels of safety :

LEVEL 1 : Locking selector control knob and the central button.

•To activate : Turn the programmation control knob to child safety.

•Action : The control knobs are inactive*.

•To deactivate : Turn the programmation control knob to 0.

LEVEL 2 : Locking function selector knobs

•To activate : Turn the function selector knob to child safety and keep

the central button pressed in for 3 seconds.

•Action : All the controls are inactive*.

•To dactivate : the same procedure as for activating. Turn the function

selector knob to child safety and keep the central button Pressed in for

3 seconds.

*Note : In all cases, for reasons of safety, even when the controls are

locked, the oven can be switched off by turning the selector knob to 0.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rosieres HOA 03 VX SC Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info