Bedienungsanleitung Rotel RC-1570B (Seite 12 von 16) (Englisch)

581051

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RC-1570 Stereo Control Amplifier

Bluetooth Connection

Insert the supplied Bluetooth Dongle into the front USB of the RC-1570 for

wireless streaming via Bluetooth, from your device (i.e. mobile phones).

From your mobile device, look for „Rotel Bluetooth‰ and connect to it.

Connection is normally automatic, but if prompted for a password, please

press „0000‰ then enter on your device.

NOTE: Not all Bluetooth dongles will operate with RC-1570. Please use

the one supplied.

Audio Controls

Volume Control

Turn the controls clockwise to increase the volume, or counter clockwise to

decrease the volume. From the remote control press the volume + or - key

to turn the volume up or down. Press the MUTE B key to completely mute

the volume.

Balance Control

The Balance Control adjusts the left-to-right balance of the sound output.

The factory default is the center position or „0‰. To change the balance

from the front panel, press the MENU

key to toggle the front display to

BALANCE SETTING mode. Then press the - or + keys on the front panel to

change the value to LEFT or RIGHT. The value can change from L15 to R15.

NOTE: These settings are saved permanently including after powering off

the RC-1570.

To make temporary changes not saved after power off, from the remote

press the BAL C key to access the BALANCE SETTING menu, then press

the LEFT or RIGHT E key to adjust. When finished, press the EXIT F key

to exit the menu.

Tone Control Bypass

Bass and Treble Control (Tone Control) circuits are bypassed at factory

default to ensure the purest possible sound. The front display will show

TONE BYPASS. To turn on the tone control from the front panel, press the

key to toggle to the Bypass control then press the LEFT or RIGHT

keys to turn bypass on or off.

NOTE: This setting is saved permanently including after powering off the

RC-1570.

To temporarily changes the Tone Control Bypass, press the BYPASS K key

on the remote control to toggle the Bypass mode enabled and disabled.

Bass and Treble Controls

Set the Bass or Treble controls from the front panel by pressing the MENU

key to toggle to either the Bass or Treble Setting menu. Then press the - or +

key to adjust the value. The Bass and Treble values range from -10 to +10.

NOTE: These settings are saved permanently including after powering

off the RC-1570.

To temporarily change the Bass and Treble settings from the remote control,

press the Bass or Treble key C, then press the LEFT or RIGHT E keys on

the remote to adjust the value.

A properly setup high-performance audio system produces the most natural

sound with little or no adjustment of the tone controls. Use these controls

sparingly. Be particularly careful when turning the controls up as this

increases the power output in the bass or treble range, increasing the load

on the amplifier and speakers.

NOTE: Setting the Bass and Treble controls do not automatically turn

on the tone control. To turn on tone control, refer to previous section

Tone Control Bypass.

Dim Control

To change the brightness of the front display, press the MENU8 button to

toggle to the Display Settings. Then press the - or + keys on the front panel

to change the display brightness.

NOTE: This setting is saved permanently including after powering off the

RC-1570.

To temporarily change the display brightness, press the DIML key on the

remote.

NOTE: Tone Bypass, Bass, Treble, Balance and dimmer settings are only

saved permanently from within the Menu. Adjustments made using the

CKL buttons are temporary only and not saved after power off.

Function Control

The Function control selects the input signal source. From the front panel or

remote press the corresponding input key to select the source to listen to.

NOTE: Pressing the Aux, Opt and Coax keys on the front panel will toggle

between input 1 and input 2.

Rotel Link

This 3.5 mm stereo mini-jack (labeled ROTEL LINK IN) can optionally attach

to Rotel network enabled products with ROTEL LINK OUT connections. This

allows the attached Rotel products to communicate with each other and

be controlled via the Rotel Remote App (available for download on the

iTunes

store).

EXT REM IN Jack

This 3.5mm mini-jack receives command codes from industry-standard infrared

receivers via hard-wired connections. This feature could prove useful when

the unit is installed in a cabinet and the front-panel sensor is blocked. Consult

your authorized Rotel dealer for information on these external repeaters and

the proper wiring of a jack to fit the mini-jack receptacle.

Computer I/O Connector

The RC-1570 can be controlled via RS232 for integration with automation

systems. The COMPUTER I/O input accepts a standard straight DB-9 Male-

to-Female cable.

For additional information on the connections, software, and operating codes

for computer control of the RC-1570, contact your authorized Rotel dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RC-1570B Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info