Bedienungsanleitung Rotel RCD12 (Seite 9 von 12) (Englisch)

489960

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

English

sequence, showing the next memorized track. Continue pressing the

REVIEW button to see the complete memorized track list.

If you do not press the REVIEW button while the track number is displayed,

the review process is terminated and the unit resumes whatever mode it

was in before you started to review.

Note that you may remove a selection from the play list during the review

procedure using the CLEAR button, as described below.

CLEAR Button

Remote Only

This button allows you to remove a track selection from the memorized

program play list during the review procedure described above. Follow

the review procedure until the desired track number is displayed. Then,

instead of pressing the REVIEW button to continue, remove the displayed

track by pressing the CLEAR button while the number is still showing. You

may then continue the review procedure.

RANDOM Button

Remote Only

This instructs the CD player to play tracks from the entire disc in random

order. Once all of the selections have been played once, the disc will

stop playing, unless the REPEAT Button (see below) has been engaged, in

which case the random play will continue until the STOP button is pressed.

When the RANDOM button is engaged, an icon will be displayed.

REPEAT Button

Remote Only

This button allows you to repeat the current track or the entire disc

continuously until the feature is cancelled by disengaging the REPEAT

button or pressing STOP. The REPEAT button steps sequentially through the

available options. Press the button once and the RCD-12 will repeat just

the current track, displaying the icon in the Display. Press the button a

second time and the RCD-12 will repeat the entire disc, displaying in

the Display. Press the button a third time to cancel the REPEAT function.

As noted above, REPEAT can be used in conjunction with the RANDOM

play feature.

NOTE:

The REPEAT function is automatically cancelled when the disc

is ejected.

SCAN Button

Remote Only

This feature automatically plays the ﬁrst ten seconds of each track on

the disc (or the memorized program). To activate the feature, press the

SCAN button. The icon appears in the Display. To stop scanning and

resume normal operation at the current track, press the SCAN button

again or press the PLAY button.

TIME Button

Remote Only

Normally, the RCD-12 displays the elapsed time of the currently playing

track. The TIME button allows you to step through two alternative time

displays. Pressing the button once displays the time remaining in the

current track, which counts down as the track continues playing. Pressing

reverse at 4X, then 8X, 16X, and 32X normal speed. One more press of

these buttons, or by pressing PLAY button returns the player to normal speed.

While the buttons are pressed, you will hear high-speed audio.

Additional Features

These convenience features add extra functionality to the RCD-12, including

the ability to memorize a group of tracks to be played, to repeat a disc,

program, or track over and over, to play the tracks on a disc in random

order, to automatically play the ﬁrst 10 seconds of each track, and to

select from several available time displays.

PROGRAM Button

Remote Only

This button, labeled PROG, allows you to memorize as many as 20 tracks

on the current disc for playback in a speciﬁc order.For example, you

could instruct the RCD-12 to play track 5,followed by track 3, followed

by track 8.

Note:

Programmed play lists cannot be set up with MP3 and WMA

discs.

To begin a program:

Insert a disc into the slot loader. The RCD-12 will read the contents 1.

of the disc.

Press the PROG button on the remote control.The PROGRAM indicator 2.

will light up in the Display, along with “P-00” indicating that the unit

is waiting for the ﬁrst track to be memorized.

Enter the ﬁrst track number using the DIRECT ACCESS buttons. 3.

Your selection will be memorized automatically and the Display

indicator will change to “P-01”, indicating that one track has been

memorized. Continue entering the rest of your selections using the

DIRECT ACCESS buttons. Note that there is no need to press the

PROG button as each selection is memorized as it is entered.

Once you have memorized a play list, the RCD-12 remains in PROGRAM

mode until you eject the disc or press the STOP button twice in succession.

If you press the PLAY button, the memorized program will play instead of

the entire disc, starting with the ﬁrst selection in the memorized list.

When a PROGRAM has been memorized, most functions that would

normally affect the entire disc operate on just the memorized program. For

example, the TRACK buttons advance to the next track in the memorized

program, not the next track on the disc. Likewise, the REPEAT button (see

below) continuously plays the memorized program, not the entire disc.

Note:

The Random Play feature can not be used when using the

Programmed Play feature.

REVIEW Button

Remote Only

This button is used to review the memorized tracks in PROGRAM mode.

Press the button and the ﬁrst memorized track number will appear in

order in the Display, for approximately ﬁve seconds. Pressing the REV

button again while the track number is displayed will continue the review

Rotel RCD12 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info