Bedienungsanleitung Rotel RDD-1580 (Seite 10 von 12) (Englisch)

577720

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RDD-1580 Digital to Analog Converter

Fuse Replacement

If another electrical device works when plugged into the power outlet, but the

Power Indicator of the unit does not light when plugged into the same outlet

and the Power Switch is pushed in, it indicates that the internal power fuse

may have blown. If you believe this has happened, contact your authorized

Rotel dealer to get the fuse replaced.

No Sound

If the unit is getting power, but is producing no sound, check the INPUT

INDICATORS on the front panel. Make sure the selected source is connected.

Also check to make sure the analog outputs of the unit is properly connected.

Can not play 24 bit 192kHz source

96kHz and 192kHz playbacks are only available through the rear digital

inputs. Please also note that many media players are not capable of decoding

24bit 192kHz audio files. Please make sure your player can decode 24bit

192kHz files. Also, confirm the RDD-1580 PC-USB input is configured to

USB 2.0 Audio and the Windows audio driver is installed on your computer.

(See PC-USB Input in the manual for more details)

NOTE: MAC computers do not need a driver but require software that

supports 24bit 192kHz playback but still require the RDD-1580 PC-USB

input to be conferred to USB 2.0 Audio.

Playable Audio Format

your authorized Rotel dealer for information on these external repeaters and

the proper wiring of a jack to fit the mini-jack receptacle.

12 Volt Trigger Input

The RDD-1580 can be activated by a 12 volt trigger signal. The trigger

input accepts any control signal (AC or DC) ranging from 3 volts to 30 volts.

When a cable is connected to the 12V input and a trigger signal is present,

the RDD-1580 is activated. When the trigger signal is turned off, the unit

goes into standby mode. The front panel power indicator remains illuminated,

but the unit will not operate.

NOTE: When using the 12V Trigger feature, leave the POWER button in

the ON position.

Audio Controls

Source Input 4B

The Source Input selects the input signal source. From the front panel or

remote press the corresponding input key to select the source to listen to.

Repeat F

Some audio source devices support the use of the repeat function including

Repeat Track, Repeat Album, Repeat Off. Press the Repeat key F on the IR

remote control to toggle these functions. The USB source LED 4 will blink

as follows to indicate the currently activated Repeat function.

Repeat Off: One time blink [Factory Default]

Rpeat Album: Two times blink

Repeat Track: Three times blink

Random E

Some audio source devices support Random playback of music. Press the

Random key E on the IR remote control to toggle the Random function.

The USB audio source LED will blink as follows to indicated the currently

activated function

Random Off: One time blink [Factory Default]

Random On: Two times blink

Factory Default

The RDD-1580 can be reset to restore the factory Default settings. To restore

factory defaults press and hold the front USB source input key 4 for 5

seconds until all Source LEDs are blinking. Release the USB source input

key and the RDD-1580 will restore factory settings and restart.

Troubleshooting

Most difficulties in audio systems are the result of incorrect connections,

or improper control settings. If you encounter problems, isolate the area

of the difficulty, check the control settings, determine the cause of the fault

and make the necessary changes. If you are unable to get sound from the

amplifier, refer to the suggestions for the following conditions:

Power Indicator Is Not Illuminated

No main power to the unit. Check the front panel power switch. Make sure

that it is set to the ON position. Check AC power connections at the unit

and the AC outlet.

USB Apple (iPhone, iPod, iPad)

Format Notes

Apple Lossless

MP3

AAC

AIFF

Any supported file loaded to Apple device.

Phone may resample depending on stored

format. May exclude Apps designed to play

flldbhd

AIFF

WAV

USB Bluetooth

Format Notes

formats not originally supported by the sending

device.

USB Flash Drive

F t

N t

May exclude Apps designed to play formats not

originally supported by the sending device.

Any format supported

by the sending device.

ormat

otes

MP3

WMA

WAV

OGG Vorbis

M4A/AAC

48K 16 Bit Maximum

PC-USB

Format Notes

Format determined by

the Media Player/

Any supported format by the PC software

44 1K 48k 88 2K 96K 176 4K 192K

Coax/Optical

Format Notes

Server software that

you use.

48k

96K

176

192K

16 bit, 24 bit

SPDIF LPCM

44.1K, 48k, 88.2K, 96K, 176.4K, 192K

16 bit, 24 bit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RDD-1580 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info