Bedienungsanleitung Rotel rdv 1050 (Seite 2 von 38) (Englisch)

139016

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

RDV-1050 DVD Player

Important Safety Instructions

WARNING: There are no user serviceable parts inside. Refer all servicing to qualified

service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose the unit to

moisture or water. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure, immedi-

ately disconnect the power cord from the wall. Take the unit to a qualified ser-

vice person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep this manual so

you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself. Fol-

low all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use benzene, thinner or

other organic solvents and disinfectants. These may cause deformation or discoloring.

You must allow a minimum of 10 cm (46 inches) of unobstructed clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation

slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the

cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance that

produces heat.

The unit must be connected to a power supply only of the type and voltage specified on the

rear panel of the unit.

Connect the component to the power outlet only with the supplied power supply cable or an

exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding

and/or polarization provisions. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the apparatus. In order to com-

pletely disconnect the apparatus from the supply mains, the main plug of the power cordset

should be unplugged from the mains outlet. The stand-by LED indicator will not be lit up to

show the power cord is unplugged.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed

to heat, or damaged in any way. Pay particular attention to the power cord at the plug and

where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left unused for a

long period of time.

Immediately stop using the component and have it inspected and/or serviced by a qualified

service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support its

weight. Do not place it on a moveable cart that could tip over.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment gene rates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct

exposure to beam.

3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player;

leave all servicing to qualified service personnel.

WARNING!

To reduce the risk of electrical shock, fires, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose the unit to rain or moisture.

3. Do not touch the power cord or plug with wet hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1050 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info