Bedienungsanleitung Rotel rdv 985 (Seite 27 von 30) (Englisch)

137948

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

RDV-985 DVD Player

Precautions

Please read this manual carefully. In addition

to basic installation and operating instructions,

it provides valuable information on various

system configurations as well as general in-

formation that will help you get the most from

your system. Please contact your authorized

Rotel dealer for answers to any questions you

might have. In addition, all of us at Rotel wel-

come your questions and comments.

Save the RDV-985 shipping carton and all en-

closed packing material for future use. Ship-

ping or moving the RDV-985 in anything other

than the original packing material may re-

sult in severe damage.

Be sure to keep the original sales receipt. It

is your best record of the date of purchase,

which you will need in the event warranty ser-

vice is ever required.

Placement

Place the RDV-985 on a surface that is level,

dry and neither too hot nor too cold (between

5˚C and 35˚C, 41˚F and 95˚F). Do not place

the unit where it will be exposed to direct

sunlight. Avoid locations that are dusty. Do

not place the unit too close to the television

set. Do not place the RDV-985 where it will

be exposed to vibrations, such as near a sub-

woofer. To ensure proper ventilation observe

the minimum clearance specifications listed

in the safety information on page 2.

Audio/Video Connections

NOTE: Do not plug in the power cable un-

til all audio/video signal connections are

complete. Do not change any audio/video

cable connections until the RDV-985 has

been unplugged from the power outlet.

Carefully read the instructions supplied with

the component you are going to connect to

the RDV-985 to be sure they are compatible.

If you have questions, contact your authorized

Rotel dealer.

NTSC/PAL Switch

Set the NTSC/PAL switch to the proper set-

ting for your TV. Television systems in North

America use the NTSC standard.

NOTE: Connect VIDEO OUT of the

unit directly to the video input of your TV.

Connecting VIDEO OUT to a TV via a VCR

may result in unacceptable video quality

because many discs are copy-protected.

12 13

16 17 18

1514

Figure 4: Rear Panel Connections

VIDEO OUT jack

Outputs a composite video signal.

S-VIDEO OUT jack

Outputs an S-video signal.

COMPONENT VIDEO OUT jacks

(Y/PB/PR)

Outputs component video signals.

NTSC/PAL Output Switch

Switches the video output signal between NTSC

and PAL formats.

AUDIO OUT jacks (LEFT/RIGHT)

Outputs stereo analog audio signals.

DIGITAL OUT jack (OPTICAL)

Outputs digital audio signals. Only an opti-

cal connector is provided.

AC power cord)

Connects to the wall outlet.

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom

Power does not come on.

Remote control does not work.

No picture is displayed on the

monitor.

Picture is noisy.

No audio is reproduced.

No audio is reproduced when

playing back a DVD disc recorded

with 96-kHz, linear PCM audio.

Sound is distorted or noise is

generated.

Picture is garbled.

Picture does not fit the television

screen.

Operation is not possible.

Possible case

Power plug is not inserted securely.

Too far from the unit.

The tip of the remote unit is not

pointed in the right direction.

Batteries are exhausted.

Battery polarity is incorrect.

Connection of video cable is

incorrect.

Input selection of TV is incorrect.

Disc is not playable.

The unit is connected to a VCR

directly and the copyguard function

is activated.

Connection is incorrect.

Input selection of amplifier is

incorrect.

The audio signal derives from the

unit's DIGITAL OUT.

Disc is dirty.

The screen saver mode is set to

MODE 1, and the screen saver

function is activated.

MONITOR TYPE is not correctly set.

Television is not correctly set.

Microcomputer malfunctions due to

lightning or static electricity.

Moisture condensation occurs by a

sudden change of temperature or

humidity.

Remedy

Plug in securely.

More closer to the unit.

Point the infrared light- emitting window

toward the remote sensor on the front panel.

Replace the batteries with new ones.

Take out the batteries and insert them again

in the correct direction.

Connect the cable correctly.

Select correctly.

Use a playable disc. (See page 11.)

Connect the unit so that the picture signal

flows dir ectly to the TV.

Check the connections.

Select correctly.

Use the AUDIO OUT when playing back such

discs.

Wipe the disc surface.

Set the screen saver mode to the other mode.

Select monitor type correctly. (See page 24.)

Set the television correctly.

Turn off the power and unplug the power

cord, then connect the power cord again.

Turn off the power, then turn it on a few

hours later.

RDV-985 Inside Spreads 11/11/99, 3:51 AM2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 985 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info