581037
46
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
46
RSP-1572 SURROUND SOUND PROCESSOR
Can I connect components which have earlier versions of HDMI?
Yes, because HDMI is backwards-compatible. This means that components
which have earlier versions of HDMI (such as HDMI 1.1 or HDMI 1.2)
will perform correctly when connected to the HDMI 1.4 inputs or outputs
of the unit.
If your DVD player is equipped with HDMI 1.2a, the HDMI connection
will permit the transmission of 1080p (high definition) video signals.
Which is the best way to rescale the picture?
When using legacy components that require picture rescaling, it is better
to use the monitor scaler to handle any picture resizing. You should try
to use only one scaler in the system, so keep your DVD player set to
480p or 1080p. A 480p signal will be rescaled by the monitor and
a 1080p signal will be seen by a monitor with 1080p resolution as a
native signal.
Some Blu-ray and HD-DVD discs have been recorded in 1080i. These
should not be scaled, but are best left to the monitor to interpret into an
appropriate format for the screen.
Will the HDMI digital output improve the picture quality from old
analog sources?
Analog picture sources from legacy units begin by being less good than
digital signals, and while the RSP-1572 will translate them into a digital
format, the final quality will be constrained by the original source, and
the choice of connection (Composite or Component). The scaler cannot
correct for low resolution signals and will not improve inherently poor
picture quality.
Why does the HDMI connection sometimes not give a picture?
Although it is simple to use, the HDMI connection is actually a highly
complex electrical circuit, and within it is a security system called HDCP
(High Definition Content Protection). In some circumstances pictures
may not reproduce, or may not reproduce properly, due to the action of
DRM (Digital Rights Management) or the ‘handshake’ between the two
connected units. HDMI cables contain circuits that exchange a ‘handshake’
signal several times a second, designed to maintain the integrity of the
transmission signal and to prevent attempted unauthorized copying of
copyright material. However, these ‘handshake’ signals can be disrupted
for several reasons. If problems persist, consult your Rotel dealer.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rotel RSP-1572S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info