Bedienungsanleitung Rotel rt 1080 (Seite 8 von 12) (Englisch)

161419

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

RT-1080 AM/FM Stereo Tuner

Setting Country Mode

The RT-1080 has two modes (one for the USA

and one for Europe) that configure the unit for

differences in local markets, including FM tuning

intervals, AM tuning intervals, and differences

in the European RDS and United States RBDS

standards. Your unit has been factory config-

ured to the correct mode for the country in which

it was purchased.

To switch to the USA mode, press and

hold the POWER, MEMORY, and 9 buttons

for 5 seconds. The word LOADING will ap-

pear in the display and the unit will power up

in the USA configuration.

To switch to the European mode, press

and hold the POWER, MEMORY, and 0 but-

tons for more than 5 seconds. The word LOAD-

ING will appear in the display and the unit

will power up in the European configuration.

Basic Tuning Controls

The RT-1080 features a digital synthesized AM/

FM tuner with RDS or RBDS capability and 30

station presets. The unit offers a wide range

of tuning options. Here is an overview of the

tuning options (more detailed information is

provided in subsequent sections of this manual):

• Manual frequency tuning tunes up or

down to the next station frequency. Set the

TUNE/PRESET mode to TUNE. Turn off

AUTO TUNING. Use the DOWN/UP con-

trols to tune up or down.

• Direct frequency tuning lets you en-

ter the desired station frequency digits. Press

the FREQUENCY DIRECT button on the

remote and enter the digits using the

NUMERIC buttons.

• Automatic frequency search tuning

lets you search up or down to find the next

receivable broadcast signal. Set the TUNE/

PRESET mode to TUNE. Turn on AUTO

TUNING. Use the DOWN/UP controls to

search up or down.

• Memory station preset tuning lets

you directly enter the number of a memo-

rized station preset number. Enter the num-

ber of the memorized preset using the NU-

MERIC buttons.

• Preset scan tuning scans through the

memorized station presets. Press the PRE-

SET SCAN button to begin scanning.

• RDS (Europe) or RBDS (USA) tuning

provides special tuning and search features

based on data codes encoded with the

broadcast signal. See the RDS section of

this manual for detailed information.

BAND Button

The BAND button selects whether the tuner

receives AM or FM broadcast signals. Press

the button to toggle between AM and FM. An

indicator will light at the left portion of the

display to confirm your choice. The currently

tuned station frequency will be shown.

TUNING Controls

A pair of buttons, labeled DOWN/UP on the

front panel and < TUN/PRESET > on the re-

mote, serve as the main tuning controls for the

RT-1080. In the following instructions, we re-

fer to these as DOWN/UP buttons. You can

use either the front panel or remote buttons;

their function is identical.

These controls provides different tuning func-

tions, depending on the mode of operation:

In the FREQUENCY TUNING mode with

AUTO TUNING off, press a DOWN/UP

button to manually jump to the next frequency,

regardless of whether or not a station is broad-

casting on that frequency.

See the TUNE/PRE-

SET button and AUTO TUNING button sections

for details on changing the tuning modes.

In the FREQUENCY TUNING mode with

AUTO TUNING on, press a DOWN/UP

button to start auto tuning. The tuner begins

automatically scanning up or down through

the frequencies until the next receivable sig-

nal is detected. If this is not the desired sta-

tion, repeat the automatic tuning procedure

to find the next station. Weak stations will be

skipped during auto tuning. If no receivable

signal is detected, the tuner will revert to the

last previously tuned station.

See the TUNE/

PRESET button and AUTO TUNING button

sections for details on changing the tuning

modes.

In the PRESET TUNING mode, press a

DOWN/UP button to advance to the next

memorized station preset.

See the TUNE/PRE-

SET button section for details on changing the

tuning modes.

In the RDS PTY search mode, press a

DOWN/UP button to select the desired pro-

gram type from the scrolling list in the display.

See the RDS PTY button in the section on RDS

tuning for details.

NOTE

: Several indicators in the display assist

tuning. A large display shows the tuned fre-

quency. A signal strength indicator shows the

strength of the incoming signal. A TUNED in-

dicator lights when a sufficiently strong sig-

nal is received. A ST indicator lights when a

stereo FM signal is received. Indicators show

the currently selected tuning mode.

NUMERIC Buttons:

Station Presets

The RT-1080 can store up to 30 station pre-

sets for recall using the NUMERIC keypad.

These station presets can be used for any

combination of AM stations and FM stations.

The RT-1080 is delivered from the factory with

a set of generic station presets that may or may

not match available stations in your area. To

memorize a new station preset:

1. Tune to the desired station, AM or FM.

2. Press the MEMORY button. A MEMORY

indicator will flash in the display.

3. While the MEMORY indicator is flashing,

press the number of the preset where you

wish to store the station frequency. For ex-

ample, to memorize preset 3, press the 3

button. To memorize preset 15, press the

1 button followed by the 5 button.

4. A previously stored frequency is erased from

memory when a new frequency is memo-

rized for the same preset.

To tune to a previously memorized

station preset, press the preset num-

ber using the NUMERIC buttons. For

example, to tune to preset 3, press the 3 but-

ton. To tune to preset 30, press the 3 button

and then press the 0 button within 5 seconds.

NOTE

: The NUMERIC buttons can also be used

for FREQUENCY DIRECT tuning.

Rotel rt 1080 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info