Bedienungsanleitung Rotel RT-11 (Seite 10 von 13) (Englisch)

489987

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

RT-11 DAB/FM STEREO TUNER

RDS Broadcast Reception

This Rotel unit is equipped with RDS (Radio Data Systems) reception

capabilities. The RDS broadcast system provide additional functionality

to FM radio reception by transmitting encoded information along with

the radio signal. This signal is decoded by an RDS receiver and can

provide a range of informational features including:

1. A display of the station’s identifying name (e.g. BBC1)

2. A display of the station’s program content (e.g. ROCK or NEWS).

3. Trafﬁc information broadcasts.

4. A scrolling text display for announcements or information.

5. Current time and date.

RDS broadcasting has been widely available in many European markets

for years. There are a large number of RDS stations and most users will

be familiar with the features and operation.

Note: The RDS features are entirely dependent on the broadcaster

sending properly encoded signals. Thus, they will only be available

in markets where RDS is currently implemented and where stations are

broadcasting these data signals.

RDS Button O

The RDS button on the remote control can step through the various

displays. Press the RDS button on the remote to step through the following

displays.

1. Radio Text

2. PTY, or the type of content.

3. Name of station.

4. Stereo or Mono station.

5. Current time.

6. Today’s date.

MONO Button O

The MONO button on the remote control changes the FM mode from

stereo reception to mono reception. In stereo mode, a stereo signal

will be heard if the station is broadcasting a stereo signal and there is

sufﬁcient signal strength.

Note: Switching to mono mode can be a useful way to improve

the reception of weak or distant FM signals. Less signal strength is

required for clean mono reception than for stereo reception.

DAB RADIO

Make sure that your local area can receive Digital Audio Broadcast

(DAB) broadcasting signal.

Press the DAB 7 button on the front of the panel, or remote N.

DAB channels are categorized into ensembles, which are also known

as multiplexes. Each multiplex provides a number of stations and each

service contains a primary service that can contain secondary services.

DAB technology allow broadcasters to transmit additional data along

with the audio, which can include other audio channels, text and even

images and computer data in the future.

DAB Radio Station Playing

1. Select DAB Button from the front panel and the unit will scan for available

stations. After scanning you will see the following menu.

DAB

Push the ENTER key 0 to see available stations.

Storing a DAB station in a preset

While a DAB station is playing, hold down the memory button 9I,

then press the number of preset assigned from numeric pad 4H. Up

to 30 preset DAB radio stations may be stored.

Playing a preset DAB station

When a DAB station is playing, you can switch to a preset station in one

of the following ways.

1. From the numeric pad 4H, press preset number of the desired

station.

2. Press PRESET +/- K on the remote to call out preset numbers and

corresponding station. Turn the knob to choose the desired station, then

press ENTER 0 to select, or press the ENT key on the remote.

DAB Settings Menu

Press the DAB 7N on the front panel or remote to toggle to the DAB

settings Menu. There are 6 sub-menus. Turn the knob on the front panel or

use the UP/DOWN keys on the remote to go through each sub-menu.

1. <Station List>, shows station list.

2. <Full Scan> Start a full range scan by pressing the ENT key.

3. <Manual Scan> Press ENT and select stations manually by using

the Up/Down keys.

4. <DRC> Dynamic Range Control Select between “off”, “high” and

“low”. Press ENT and select Up/Down keys to change.

5. <Prune> Select between “Yes” or “No”. The Prune setting allows you

to remove stations that are not active or can not be received.

6. <System>, Select the Factory Default and show Software Version.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RT-11 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info