Bedienungsanleitung Russell Hobbs 15066 therma select (Seite 4 von 90) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

377190

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

general

30 Remove the kettle from the stand before pouring.

31 To avoid the risk of splashing, pour slowly and don’t over-tilt the kettle.

32 Don’t tilt the kettle backwards, water might get on to the control area. If this happens, let the

kettle dry before use – sit it somewhere warm for 12 hours.

33 When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam

used to switch oﬀ automatically, which then condenses and escapes via vents under the

kettle.

34 You may see some discolouration on the ﬂoor of the kettle. Again, don’t worry – it’s due to

the bonding of the element to the kettle ﬂoor.

using with insuﬃcient water

35 This will shorten the life of the element. A boil-dry cut-out will switch the kettle oﬀ.

36 You must then remove the kettle from its stand to reset the cut-out.

37 Sit the kettle on the work surface till it’s cold.

care and maintenance

38 Switch the appliance oﬀ (2).

39 Unplug the stand from the wall socket, and let the kettle cool down fully before cleaning.

40 Wipe the kettle, inside and out, with a damp cloth.

41 Keep all connectors and sockets dry.

cleaning the ﬁlter

42 Check your hands are free from soap, or anything which might leave a taint.

43 Switch the kettle oﬀ, and let it cool.

44 Open the lid.

45 Push the top of the ﬁlter down and back, into the kettle, to release the hooks on the top of

the ﬁlter from the rectangular holes on either side of the spout.

46 Lift the ﬁlter out of the kettle, to disengage the bottom hook from the circular hole at the

bottom of the spout.

47 Rinse the ﬁlter under a running tap while brushing with a soft brush.

48 Rinse the kettle, in case scale particles have fallen inside.

49 Lower the ﬁlter into the kettle, and engage the bottom hook in the circular hole at the

bottom of the spout.

50 Press the top of the ﬁlter gently down and towards you, to force the hooks on the top of the

ﬁlter into the rectangular holes on either side of the spout.

51 Close the lid.

descale regularly

52 Descale regularly, (at least monthly) to keep your kettle in good working order.

53 Use a descaler suitable for use in plastic products (most products have plastic parts). Follow

the instructions on the descaler, rinse several times, then ﬁll, boil and discard the water, to

ensure no residues are left.

, Products returned under guarantee with faults due to scale will be subject to a repair charge.

wheelie bin symbol

To avoid environmental and health problems due to hazardous substances in

electrical and electronic goods, appliances marked with this symbol mustn’t be

disposed of with unsorted municipal waste, but recovered, reused, or recycled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Russell Hobbs 15066 therma select Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info