ﬁt the ﬁlter to the bin
19 Hold the lid handle in one hand, hold the bin handle in the other.
20 Turn the bin to bring the arrow on the bin from the closed padlock L to the open
21 Lift the lid oﬀ the bin, then set the bin down for the moment.
22 Turn the bin lid upside down.
23 Align the bayonet ﬁttings in the end of the HEPA ﬁlter with those in the centre of the
24 Turn the ﬁlter about a centimetre clockwise, to lock it into the lid.
25 Turn the lid the right way up.
26 Align the arrow on the bin with the open padlock U on the lid.
27 Lower the ﬁlter into the bin – you may have to jiggle it about a bit, to ﬁt the bottom
of the ﬁlter over the cone in the bottom of the bin.
28 Turn the lid, till the arrow is at the closed padlock L.
ﬁt the bin to the cleaner
29 Fit the ﬁbre ﬁlter into the space at the top of the
base. There’s a cut-out at the front, and a hole at
one side, so it only ﬁts one way.
30 Tilt the top of the bin forward.
31 Put the bottom of the bin into the space at the
top of the base, on top of the ﬁbre ﬁlter.
32 Straighten the bin, and push the bin lid against
the mount at the top of the pillar.
33 You’ll hear the bin release button click into place,
locking the bin lid to the mount.
34 The cleaner is now ready for use.