27 Grip the bin handle, press the bin release buttons, and lift the bin.
28 Keep the bottom of the bin below the dustbin rim.
29 Press the latch on the front of the bin, to open the bottom.
C CHECK THE FILTERS
30 Spread out some newspaper, and wear rubber gloves.
, Filters must be completely dry before replacing in the cleaner.
C PLASTIC FILTER (this is the one most likely to block)
31 While the bin is open, turn it upside down.
32 Turn the plastic ﬁlter 8mm clockwise, then lift it out.
33 Wash it in warm soapy water, rinse, then air dry.
34 Drop it into the bin, and turn it anti-clockwise to lock it in place.
35 Close the bin, and turn it right way up.
C FOAM FILTER
36 Pull the catch, to open the cover, and pull out the foam ﬁlter.
37 Wash it in warm soapy water, rinse, squeeze it out, then air dry.
38 Replace the foam ﬁlter inside the cover, then close the cover.
C HEPA FILTER
39 Grip it by the left tab, pull forward, then lift it out of the cleaner.
40 Soak in warm soapy water for a few minutes, rinse, then air dry.
41 Lower it into its space in the cleaner.
42 Push both tabs on top of the HEPA ﬁlter towards the cleaner.
43 The right tab will push against the end of the HEPA ﬁlter lock.
44 Stop pushing when the HEPA ﬁlter clicks into place.
45 This prevents the cleaner operating without the ﬁlter.
46 Lower the bin into the cleaner.
C OUTLET FILTER
47 Squeeze in the tab on the cover, and pull the cover oﬀ the cleaner.
48 Lift out the outlet ﬁlter.
49 Wash in warm soapy water, rinse, then air dry.
50 Fit the lugs on the cover into the slots in the rear of the cleaner.
51 Close the cover, and press the tab till it clicks into place.