Bedienungsanleitung Russell Hobbs 25182-56 (Seite 5 von 76) (Alle Sprachen)

705881

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

4. Check that the speed control is set to O.

5. Put the plug into the power socket (switch it on, if it’s switchable).

6. Move the speed control to the 1, 2 or 3 position to operate your food processor.

7. Switch the appliance o by moving the speed control to the 0 position and unplug it.

8. Hold the speed control in the Y position to operate your food processor in short, controlled bursts.

9. Release the control to stop.

USING THE BLENDER

The general assembly steps are shown in gure A.

1. Lower the blender jug on to the motor unit, then turn the jug clockwise, to lock it in place.

2. Remove the lid.

3. Put the ingredients into the blender jug.

4. Replace the lid.

5. Align the pips on the cap with the slots in the hole in the lid, t the cap, and turn it clockwise to lock

it.

6. Don’t run the appliance without tting the cap.

7. To add ingredients while the blender is working, remove the cap, pour the new ingredients through

the hole, then replace the cap.

8. Once nished, switch the appliance o (0) and unplug it.

9. Turn the blender jug anti-clockwise, and lift it o the motor unit.

CRUSHED ICE

1. For best results, full the jug with between 150ml and 500ml of ice cubes.

2. Put the lid on the blender, then:

3. Turn the speed control to Y for a second or two, then release it.

4. Check the results, and adjust.

USING THE PROCESSOR

The general assembly steps are shown in gure B.

1. Fit the spindle to the top of the motor unit.

2. Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.

3. Fit the drive shaft.

4. Fit the chopping blade.

5. Put the ingredients into the bowl.

6. Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise

to lock the tab into the top of the handle.

7. Once nished, switch the appliance o (0) and unplug it.

8. Turn the jug anti-clockwise, and lift it o the motor unit.

USING THE MIXER/CREAMER ATTACHMENT

The general assembly steps are shown in gure C.

Use the mixer to mix ingredients together.

Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar together.

1. Fit the spindle to the top of the motor unit.

2. Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.

3. Fit the drive shaft.

4. Fit the mixer or creamer attachment.

5. Put the ingredients into the bowl.

6. Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise

to lock the tab into the top of the handle.

• To add ingredients while the motor is running, lift the pusher out of the tube, add the ingredients

through the tube then replace the pusher.

• To remove the lid, turn it anti-clockwise to unlock it, then lift it o.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Russell Hobbs 25182-56 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info