Two Ways of programming your Z1
• By Direct Code input from codes at the back of the
manual (preferred)
• By Search Mode (secondary method)
We would normally recommend using the dedicated code
numbers in the back of this booklet to setup your remote.
These numbers are particular to your brand of TV and will
inevitably give best results. As a secondary setup method,
your remote can undertake a complete code search. The
code search method is often used when a particular brand
is not listed, or when some features are not responding to
direct code input. As there are a great number of codes for
the unit to select and test, search mode can take upto 15
minutes to complete.
The 5 Second Rule
Your new easytip Z1 needs your help to get started.
We recommend that you study the step by step
instructions before programming the codes. The basis of
this programming is the 5 Second Rule. Each successive
action when programming must be completed within 5
seconds or the unit will revert back to normal operation.
This is deliberate so that other users of your remote will
not inadvertently reprogram the unit.
GB User Manual
D Bedienungsanleitung
I Istruzioni per l’usoF Mode d’emploiNL Gebruiksaanwijzing
User Manual
Helpline 00800 31133113
5
