Bedienungsanleitung Ryobi LSDT1202 (Seite 6 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

513654

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

English

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

NOTE: To prevent further shutdown of the battery, avoid

forcing the tool.

If releasing the trigger does not reset the battery and tool,

the battery pack is depleted. If depleted, the battery pack

will begin charging when placed on the lithium-ion charger.

TO INSTALL BATTERY PACK

See Figure 2.

 Place the rotation selector in the center position.

 Insert the battery pack into the product as shown.

 Make sure the latches on each side of the battery pack

snap in place and that battery pack is secured in the

product before beginning operation.

TO REMOVE BATTERY PACK

WARNING

Always remove battery pack from your tool when you

are assembling parts, making adjustments, cleaning, or

when not in use. Removing battery pack will prevent

accidental starting that could cause serious personal

injury.

 Lock the switch trigger by placing the direction of

rotation selector in the center position.

 Depress the latches on each side of the battery pack.

 Remove the battery pack from the tool.

WARNING

Battery tools are always in operating condition.

Therefore, the switch should always be locked when

not in use or carrying at your side.

SWITCH TRIGGER

See Figure 3.

To turn the drill on, depress the switch trigger. To turn it off,

release the switch trigger.

NOTE: When selector is in center position, switch trigger

is locked.

VARIABLE SPEED

See Figure 3.

The switch trigger delivers higher speed with increased

trigger pressure and lower speed with decreased trigger

pressure.

NOTE: You might hear a whistling or ringing noise from

the switch during use. Do not be concerned; this is a

normal part of the switch function.

ROTATION SELECTOR

See Figure 3.

The bit rotation is reversible and is controlled by a selector

located above the switch trigger. With the drill held in

normal operating position, the direction of rotation selector

should be positioned to the left of the switch trigger for

forward drilling. The drilling direction is reversed when the

selector is to the right of the switch trigger.

Setting the rotation selector in the off (center lock) position

helps reduce the possibility of accidental starting when not

in use.

CAUTION

To prevent gear damage, always allow the chuck to

come to a complete stop before changing the direction

of rotation.

To stop the drill, release the switch trigger and allow the

chuck to come to a complete stop.

NOTE: The drill will not run unless the rotation selector is

pushed fully to the left or right.

Avoid running the drill at low speeds for extended periods

of time. Running at low speeds under constant usage may

cause the drill to become overheated. If this occurs, cool

the drill by running it without a load and at full speed.

KEYLESS CHUCK

See Figure 4.

The drill has a keyless chuck to tighten or release drill bits

in the chuck jaws. The arrows on the chuck indicate which

direction to rotate the chuck body in order to lock (tighten)

or unlock (release) the drill bit.

WARNING

Do not hold the chuck with one hand and use the power of

the drill to tighten the chuck jaws on the drill bit. The chuck

body could slip in your hand, or your hand could slip and

come in contact with the rotating drill bit. This could cause

an accident resulting in serious personal injury.

BIT STORAGE

See Figure 5.

When not in use, bits provided with the drill can be placed

in the storage area located on the base of the drill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi LSDT1202 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info