Bedienungsanleitung SAB NVR2000A (Seite 2 von 2) (Englisch)

670257

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

8 9

1110

The maximum number of 4 playback video channels have been

reached, please deselect other channels rst to continue.

Note

This product supports 32-bit IE8 or later versions and does not

support 64-bit IE browsers. It also supports Apple Safari and

Mozilla Firefox browsers.

8.1 Network Conguration

8.3 Access to the NVR in WAN

Now you can access to your NVR using the DDNS address, such as

https://domain name:HTTPS port.

As an example: https://a6747.mynvr.org:443

Click Add New...

If there is a UPnP function in your router.

Choose “Forwarding > UPnP”, make sure that the Current UPnP

Status is Enabled.

If UPnP has been enabled in the router, you do not need to perform

the following steps.

If UPnP is disabled, you need to select one of the following methods

to congure port forwarding on your router.

For these steps, we will be using the TP-LINK brand wireless router as

an example.

If there is no UPnP function in your router:

You need to manually add port forwarding, refer to the following

steps. You need go to the “Forwarding > Virtual Servers” panel for

setup.

You can also access the NVR or IP Camera directly through the local

network and remotely via manual port forwarding.

Click Save

Check DDNS

Check Enable DDNS

4. Repeat the Step3 to add multiple IP Cameras. Find your IP Camera in

the IP Camera List, then click the Finish button to complete the

setup wizard.

After the IP Camera is added successfully to the NVR, there are two ways

to enable manual recording functionality when in the Live View mode.

Method 1

Left click the mouse in the channel, and some buttons will pop up as

shown .

You can see the recording information, include Manual Record, Alarm

Record, Schedule Record.

1. Right click the mouse in the Live View mode, and a shortcut menu

will pop up.

2. Select the Playback to enter the Playback page.

3. Select the time and Video Type of the recording. Check the Channels,

and you can check up to four channels.

4. Click the Search button. Then you can see the recording video in the

Playback page.

Method 2

1. Right click the mouse in the Live View mode, and a shortcut menu

will pop up.

2. Select the Manual Record to enter the Manual Record page.

3. Check the channels for which you want to enable recording. Click the

OK button.

4. Then click the icon to exit the interface.

In the Live View mode, the icon is at the bottom right of the screen

for each channel, indicating recording is on going.

1. Congure network information.

Right click the mouse in the Live View mode, choose “Menu >

Settings > Network”. Check the Network checkbox, then congure

the network information of the NVR.

It is highly recommended to set the port range from 5000 to 65535,

and the value of the port for each device should be unique.

2. Congure the DDNS.

Right click the mouse in the Live View mode, choose “Menu > Settings

> Network”. Check the DDNS checkbox. Enable DDNS on the NVR. We

recommend you to use the DDNS by default.

The live view interface will show you the video feed of each IP Camera.

Select the Type

Check Network

Set the HTTP Port or HTTPS Port

IP Address: Set it to an IP address of

NVR in the range of the router

address pool, or keep it as default.

Subnet Mask: Keep it as default.

Gateway: Should be the same as the

Router’s IP address.

DNS Server: Should be the same as

the router’s DNS Server address.

Check UPNP

Click Save

8.2 Access to the NVR in LAN

Open the ”Equipment Search Tool” in the resource CD. It will display

information of the NVR on your LAN.

Double click the NVR in the list, and your default browser will open up

to the login page.

You can access to the NVR via the browser in LAN.

Manual Recording

Playback

8 Remote Access

Click the button to enable recording.

To disable recording, click again the button in the channel, or

uncheck the channel checkbox on the Manual Record interface.

Note

Input the port and IP address

of your NVR and click Save.

443

7. Click OK

3. Select the Channel

5. Input the Username and

Password of the IP Camera.

4. Enusre that the IP address of the

IP Camera and NVR is on the same

network IP segment, and that the

subnet mask and gateway are the

same as the NVR's.

Click Finish

6. Select the protocol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SAB NVR2000A Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SAB NVR2000A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info